have a 2010 rzr 800 4 and need a arms becuase the bore is worn out so bushings still dont fit tight so im going to buy the a arm kit from superatv but have heard i need new axles if i go from stock to the 1.5 offset. Any help?
Possible sale
So the wife and i decided we would get much more use out of a decent size boat since we are 5 min from the chesapeake bay And 45 min from the nearest place to ride. Ill prob pick up a beater dirt bike to ride around with the kids when we do decide to make the trip. So i wanted to see what a round wbout asking price should be. I craiglisted sportsmans in va and the new 500s are 6-65. Yet used (like 2006) 6 and 700s are almost 7k Doesnt really make sense. Mine is a 2013 500 ho camo with a polaris winch. I was thinkiń around 5k. If any one here would be intrested it will be in va by july. There crating it up monday. It has almost 1k miles but less tthan 100 hrs
2005 300ex carb jetting
im running a pro circuit stainless steel header and a big gunevo R series slip on im using a dno jet kit with stage one and 2 jets in it. the directions say to use the dyno jet needle on groove 4 for below 5000 feet (im at 451 feet) then it says to use the dyno jet main adapter dja001 and to use main jet dj118 with an after aftermarket exhaust below 3000 feet an to set the a/f mix scew 3 turns out this dose not work at all iv checked to make sure i did it right over and over iv adjusted the needle height and the a/f mix screw with any combination you can imagine nothing really works any one got any tips? my machine ran 100% perfect be for here a pic https://www.facebook.com/photo.php?f…6626465&type=1
Polaris sportsman winch part# 2878395
I’m wondering if there is any way this winch fits on my 2014 Sportsman 550 XP EPS. I found a good deal on a new one but the information on this particular model is proving hard to find. I know it’s not the recommended winch from Polaris.
sti black diamonds xtr tires on 850 xp
Ok bout to make up my mind I beleive ill go with the bd xtr tires but I can get the 27" cheaper than the 26" dnt make sense I trail ride hill climb rock crawl and play in creeks up an down water falls I dodge mud holes unless I have tu hit em tu get wer im going . So should I save 4$ and get the 27" or stick to stock 26" my 850 im sure will pull the 27"ers just fine rite without clucth kit im only be. 1/2" higher than stock . Do youns thank these tires will work good fer me
Factory wheel center cap
I was riding the trails today and a tree hit my wheel and broke the plastic center cap on my factory 1000 wheels. Does this little part really cost $20. Cheapest I could find is $20. Anybody know where I can find one cheaper or anything. Thanks.
new member
Browse the site previously, lots of great information, knowledgeable members, had to join.
recently abducted a 92 honda trx300fw 4 wheel drive, actually a guy owed me some money. he had recently had engine rebuilt. Was right time and right place.
It runs great, but does pop when you drive/turn. Had it checked by honda dealer, looks like i need a drive shaft assy on front left. Parts not available through dealer so need to find one, years 88-92. Appreciate any help
recently abducted a 92 honda trx300fw 4 wheel drive, actually a guy owed me some money. he had recently had engine rebuilt. Was right time and right place.
It runs great, but does pop when you drive/turn. Had it checked by honda dealer, looks like i need a drive shaft assy on front left. Parts not available through dealer so need to find one, years 88-92. Appreciate any help
Engine dies when transmission placed in gear
I’m looking for a little help – my grizzly is having some clutch problems that don’t seem to match the other threads!
When I went to start it up and move it last, the clutch made a grinding noise when I put it in gear and the engine sputtered out! I can turn the secondary sheave by hand and it turns the wheels, and the primary rotates just fine when not in gear.
But, with the engine started something in the primary side of the clutch seems to kick up a big fuss when I put it in gear. Does this sound familiar to anyone?
gimligrizz
Yamaha 700 EPS
800S rear clicking noise
Thought I throw this out there to see if anyone has experienced this noise. While out last weekend I took off and heard a slight clicking from the rear. Got out and had it driven slowly and it sounds as if its in the axles/ rear end. The front axles and the driver side rear axles have slight side to side movement but the rear passenger side does not. Nothing visible and boots are good. Anybody run into this before? rzr is a 2011 model. Thanks.
how to check gearbox oil in an outlaw 50
My son has an outlaw 50 he had rolled it the other day and the gear oil was in the air box so I want to top it off but I’m not sure on how much to add because there is no site glass or dip stick so I asked a tech at my local dealer and he could not give me a straight answer any help would be appreciated.
