CZ Chains

Got 980 miles on the quad. I was in some deep water, but the mud wasn’t all that bad. More like sandy silt, not that thick heavy stuff that weighs a ton. I was stuck in it up to the headlights only because the quad was up on the frame on a rut.

However, when I got home and was unloading it, I head the loud clicking and popping on the rear right axle… Lower CV joint is all messed up, boot ripped apart, etc… Turns, but grinds and sticks a bit, etc…

I figure I will just replace one, rather than try to repair it and get new boots and all that. It’s got almost 1000 miles on it…

What’s the cheapest, decent axle brand? I see gorilla and Rhino, but I am trying to keep the cost down because I also need new brake pads all around, and possibly a battery… While I was in the water, I got the "Lo 10.8" message on the dash… The battery was replaced by the dealer in August when the stator burned up from the wires rubbing against the frame and shorting out… They put in a new stator, new Regt/Rect and a new battery. I insulated the stator wires so I know it isn’t that, and I see a lot of people having issues with the crappy stock battery…

Anyway, how are the Sixity brand axles, and which one is the right one for the rear right side of this quad?

Or should I go Titan, or American CV?

I don’t do deep thick mudding… It’s more aggressive trail riding, shallow mud, and when it gets deep it is usually the thinner, sandier sand and silt sorta stuff…

Best value option?

So i recently bought 10 highlifter DHT axles for 3 seperate machines. Put 4 on an outlander 1000, 4 on a Renegade 1000, and 2 rears on a 650 Xmr. 5 minutes into the 1st ride of the season the 1st axle fails on the rear of the Renegade. It looks as though the clip that holds the CV into the Cup fell out and the whole joint pulled out loosing all the bearings. This machine was disabled and towed back to the trailer. Later in the day being nervous of more failures i looked at the axles on the 1000 Outlander and noticed that both boots on the right front axle came off. So worried that Highlifter would not warranty i took pictures while still clean. Obviously this ruined my ride because now i am dodging all the water and mud. When we get back to the trailer I looked at the axles again and the left front has grease coming out of the boot on the inner joint. Needless to say i am not impressed with Highlifter right now. I only hope that their customer service is better than their workmanship. Maybe i got a bad run of axles but now i am down 2 machines while waiting for replacements.

CZ Chains

16 tunes for record

16 tunes for record

Need gear shifting rod for 1999 500 sportsman

atv compared to snowmobile industry

Bigger tire help

Bigger tire help

Broke my first axle

Highlifter workmanship

Trx350fe es timing ?just to clarify?

Any Magnum offroad vendor??

Chains designed for your personality!