Does anyone have some foolproof instructions to wire the rear light of the Kimpex Seat Cargo Box on a 2015 570? Did a bunch of digging but not sure what the easiest method is. Can someone point me in the right direction? Thanks much!

Any guess whether a 1997 Polaris Explorer 300cc engine will match up into a 1996 Polaris Sportsman 400cc?

2006 Honda Trx400 ex What are you all using ,I’m using K&N with outerwear?

I understand this is a Honda ATV forum
But would anyone know if a 1987 Yamaha warrior 350 rear fender fit a 1990 warrior
Thanks

Gidday y’all, I was hoping someone would be able to help with a possible issue with my ’07 Foreman ES. When I raise my RPM to a certain level, my engine seems to stop climbing like it hits an electronic rev limiter. But since its carbed, how is this possible? Bike starts no problem, even in cold (Canadian) weather, runs awesome, just doesn’t have a high top speed, just under 80 km (50 mph). Before I start pulling apart the carb to clean it, is this a common issue? I feel like its a fuel issue, maybe the main jet is gummed up, so if anyone has an idea, I’d appreciate it!

Thanks

Went for a putt few days ago and it was awesome! Weather was great with 4-8 inches of fresh snow, very cool. Really like the ruggedness and performance of this Quad. Been kindly named the, "Tow Truck"! My Buddy has a wolverine 450 4×4, nice Quad, and Fourtrax 450 also, I usually ride last incase either one gets stuck. Trails we ride are very tight and misleading with a lot of water crossings. All Good, plus I carry the straps n winch. Priced used machines before I bought mine and glad I paid a bit more for mine. Getting frigid up here and be fun down there this weekend. Another day of winter fun!

Attached Thumbnails

 

Hello ya’ll…

I want to mount 10" diameter (10×8) Douglas aluminum black label rims on my 2016 Honda Rancher. I understand that the bolt pattern is the same as a Honda 400ex, so the same Douglas 10×8 black label rims should mount up to the Rancher, unless the drum brake doesn’t clear.

When I look at my current stock setup, I see that my 11" stock steel Honda Rancher rims have a decent amount of clearance between the rim and the drum brake housing.

I know you’ll all be thinking about things like offset, and outside diameter if mine is a 4×4, etc.

I don’t see any problems there because I plan to run 24" diameter tires on the Douglas rims, and the offset will be to the outside, so I don’t see a problem there either where I’ll be running in sand dunes.

Does anyone know if these 10" Douglas rims will mount up and clear the drum?

Thanks.

I’m having trouble shifting up to higher gears on a manual transmission. Seems I can’t seem to get enough leverage to easily move the shift pedal. Any thoughts on adjustment or technique?

I have a 2015 Yamaha FZ07 that I’m going to trade for a 2000 400ex. The owner of the 400ex is going to put cash on top to make it fair for me. My question is how much is his 400ex worth?

Mods:
JE 440 kit with 10.8-1 compression and GT thunder head studs. Trail/woods porting with hot cams stage 2 cam, crf450r cam chain. Full Vinson billet 8 plate clutch setup with 250r fiber/steel plates and cr500 springs. White bros e series pro meg full exhaust with tunable cap. Oversized 12 row setrab oil cooler with oversized oil tank. Modded air box top with 2 stage foam uni filter. Rejetted carb.
Chassis:
Gusseted and powdercoated frame, lsr chromoly subframe, lsr chromoly 2+1 steering stem with anivibe clamp. Meager +1 chromoly a arms with h/d ball joints and grease fittings. Race tech triple rate piggy back front shocks with hi/low speed damping. Works ultracross rear shock with race tech upfit guts, compression and rebound adjustable. Maxxis razor 2 tires, omf beadlock wheels, rpm billet front hubs, steel braided brake lines, 450r masters, galfer rotors. Ims foot pegs, ims 4.3 gal fuel tank with billet cap. Fasst flex handlebars with full billet asv controls. Powermadd hand guards, odi grips. Omf sir scoops, precision steering stabilizer.

From the pictures the ATV looks like it’s in very good condition. The question is, is it worth the $3500 he prices it at? Please, let me know your opinions. I would appreciate it!