help needed.

sooo my kid put the water hose in my muffler. And filled her up. Now water in oil. What do I need to check besides the obvious water I have in my oil now. Bike turned over and idled fine after it pushed about a glass of water out of exhaust. Looks like I’m doing plenty of oil changes tomorrow after work. Anywhere else I need to check.

14 Rancher wheel & tire suggestions

I’m new to the forum and I just purchased my first atv. A 2014 rancher dct. I want to upgrade wheels and tires but I’m not sure where to start. Would it be best to go with a 25 or 26" tire? I don’t want to loose any power or have any future gearing issues. I’m also unsure on what offset to get. I know the stock offset is 2/5 on the front and 5/2 rear but do I have to stick with that? I see a bunch of atvs that don’t match there factory offset. Any help would be great.

Thanks
Steven

Replaced solenoid and won’t start!

I have a 2001 yamaha bigbear 400 4×4 I had problems with starting it. I went to turn on the key and then hit the starter button and the oil temp light came up, and didn’t click or make a peep but I can pull start it and it fires right up. So I bought a brand new solenoid and hooked it up and that wasn’t it either so NEED HELP!!!!!

Wheel Test.

So I decided to test fit a set of 14" Polaris XP wheels and 27" tires on the front of my new 570 today.

Please excuse the dirtiness. I like how they look but unfortunately there are issues (which I knew there would be).

So just wanted to show some of the newer guys what issues you may run into and why wheel offset and tire size are important. As for me, these wheels will be painted gloss black and spacers will be installed.

Chains designed for your personality!

Visit Us On FacebookVisit Us On TwitterVisit Us On YoutubeVisit Us On LinkedinCheck Our Feed