Hi all, I am new to the forum and to the Honda atv world. yesterday we (my wife and I) bought two 4 wheelers Hers is 2014 Recon 250 and mine is 2014 Rancher 4×4 420 with power steering.
New to the forum
Hi all, I am new to the forum and to the Honda atv world. yesterday we (my wife and I) bought two 4 wheelers Hers is 2014 Recon 250 and mine is 2014 Rancher 4×4 420 with power steering.
Grizzly 600 clutch problem
I have a 1999 Grizzly 600 and I recently replaced the belt and took off the primary and then put it out back together and now I have oil spraying out of the clutch case and the bolt comes off, that I toured on to proper spec. Any help would be awesome.
05 rancher electrical problem
I have a 2005 rancher 350 4×4 electric shift. I built the motor on it,got ready to start it and noticed that the gear indicator was flashing.Looked at the manual to see what was wrong.angle sensor was replaced stopped flashing.Before and now the gear indication on the meter will only read the gear if done manually.Replaced the ecu and still doing the same thing only only reads the gear if done manaully.electric shift will not work checked the motor.shift motor works.have done all i can.afraid the gear selector switch insid the motor is bad.
Massachusetts ?
My atv is registered and insured in NY, what do I need to do to be able to ride the state trails in Massachusetts? Anyone familiar with the trails in the state parks, are they good for a day trip? Thanks for an information.
Massachusetts ?
My atv is registered and insured in NY, what do I need to do to be able to ride the state trails in Massachusetts? Anyone familiar with the trails in the state parks, are they good for a day trip? Thanks for an information.
Build date
I have a 2000 sportsman 500 and need a new hall effect sensor. The Polaris parts guide says it could be two different parts depending on the build date. Before or after 8/09/99. How can I find out the build date?
By the way this is my first post to this site just in case this is in the wrong area.
By the way this is my first post to this site just in case this is in the wrong area.
Build date
I have a 2000 sportsman 500 and need a new hall effect sensor. The Polaris parts guide says it could be two different parts depending on the build date. Before or after 8/09/99. How can I find out the build date?
By the way this is my first post to this site just in case this is in the wrong area.
By the way this is my first post to this site just in case this is in the wrong area.
The organiser of the Paris event
Can this be removed? (Handlebar support)
Hey guys, installing some stuff on the 400ex (hoping to write up on some stuff once I get it installed) such as a Trail Tech Voyager, an atf/O2 guage, and a kill switch.
All of this mounts to Tue handle bars and am starting to run out of room. So my question is, what is the bar going across my handlebars (black rental foam thing)? Can it be removed?
