New here from west va have worked on other atvs and 2wd hondas got arancher 4wd progect and will be asking for advise did some recon this was the best site i found
Windrock may 14-16
Looking for a good ride. Hope the rain slacks up some. Ready to try the 1 k out in the hills…… Anybody else going that weekend?
Need Replacement A Arms?
Ours replacement Arms are stronger, lightweight design, fully thought through by offroad champions who have over 50 years combined experience in the industry… direct replacement, no extra parts needed.
XP1000 Replacement A Arm kit from IMG Motorsports and proven by Scranton Boys Racing for the past 2 seasons of testing. Complete 4130 Chromoly constructed for the strongest design with lightweight kept in mind when designed. They offer full adjustment and have no clearance issues with any aftermarket tie rods. The lower arm was designed to gain over 2" of ground clearance in the front and still give full axle protection. The heims and hardware used are all FK Rod Ends and made in the USA. No more broken ball joints with our very strong ball joint pins that delete the ball joint and replace it with a 7/8" Uniball. Call us now and get your XP1000 2 or 4 seat car bullet proof for any trail or track….
We have competitive pricing on all our products for dealers if you are interested?
Call us today! 951-471-1615
engine mods 2013 XP 900
Has anybody put the Muzzys 995 BIg bore kit in with the cams and carrillo rods and exhaust system W/ the Digitune Controller? if so how is it?
UTV Guide Ace build w/IMG Motorsports Cage and Touches
Check out this ACE cage we built here at IMG Motorsports… We keep them in stock for your basic colors and options and we also keep some raw so you can sutomize them if you would like to make those extra special touches to yours…
Custom Polaris ACE Cage
-Made from 1 3/4" DOM Tubing
-Rear "wrap around" bumper style
-Very Strong & Lightweight Design
-Aluminum Dzus tabbed roof made from aircraft grade aluminum
-Tabbed for single whip
-Harness bar
-6 point cage mounts and picks up all factory mounts
Cages starting at $999 so call now limited time only! 951-471-1615 and mention this add
Gps
I have a question. Hopefully someone will chime in. I have a Garmin 62S that works perfectly. However the size of the screen is the only downfall. My wife has a Garmin NUVI 50 GPS. It has the same maps installed as the 62S. I am wondering if the NUVI will stand the vibration and all the other trials that the 62S has thrown at it.It would be nice if this would work on my Polaris.Thanks for the help, Ken :unitedstates:
Whip Tech LED XP1000 Build
Check out the cage we have and the same as the one in the pics below.
XP1000 CAGES for $1499 free installation!!! Built by your boys at IMG Motorsports out of Lake Elsinore, Ca.
-Includes powder coated aircraft grade aluminum roof
-Dzus tab fasteners to secure the roof
-Tabbed for whip
-Made from 1 3/4" DOM tubing
-Triple layer tough powder coated
-Bolts right in
-High strength and lightweight design
Check them out at imgms.com or call us at 951-471-1615 and mention this post.
Affordable shipping available too!
Top trails 4-26-15
Headed up this Sunday if anybody wants to go. Then we are going to windrock may 14-16 to ride. Post up if anybody wants to go!!
Choke assembly installation
I purchased a new assembly for my Rancher 350 S because I noticed the plastic nut was broken.
I found this video for reference: https://www.youtube.com/watch?v=rZS3lSOckg8
The problem I’m having is with the piece that goes inside the rubber boot. With it in, I can’t get enough cable even with the spring compressed to connect everything.
Do I really need that piece in the boot? I tried installing with out it and it works just fine, but I’m worried that this could damage the boot.
Any thoughts?
WTB: Front Diff for 2009 RZR 800
Hey Im looking for a front diff for a 2009 polaris rzr 800. I am In Ontario, Canada. If anyone has one please let me know!
