On my ’04 sportsman 500, are the headlights supposed to work together or do they work seperately? Meaning when the high beam is on the bottom two lights go out, and vice versa. Is that normal?
Hatfield & Mccoy – Ivy Branch/LCR
Anyone know if there is a way to connect to Ivy Branch from Little Coal River. Headed there next weekend, wanted to see if both can be targeted without trailering up and moving camp. I’ve heard a 3 mile road trip maybe, how does the long arm of the law get along with that type of adventure?
Tom
I have a 2012 RZR 800 50" completely stock
Silber turbo.
Well silber finally has there turbo up forsale. It looks to be $3,995. Not much info online about it. But last time I talked to justin from silber. He said they were running up to 12psi on a stock 900s. And they were laying down 125whp at I think 8-10psi. I’ll have to make a phone call tomorrow for some accurate info. They so have a video up of a 900s at 6psi blowing the doors off a stock 1k on the street. That’s inpressive because my 1k blows the doors off my 900s on the street lol
Xp1k voltage regulator homemade mount
My 2015 XPK HL, burned up VR. at 24 hr. and 204 miles, and 2 weeks outa warranty. I ordered new VR. part # from Polaris, and also decided to get VR. up a little higher, but also with wires coming out bottom not in thru hi side where moisture can find a way in. Also wanted to keep it where air flow from the tire would still be there, to cool it. Ok, this is what I got, Cheap, and Easy, may not be perfect, but I like it mounted on aluminum more then the plastic floor, Got a UTV inc. sway bar mount support kit (or Racer tech would do, and you guys are welcome for free advertising), and welded angle iron on it to attach an aluminum plate too, to mount VR on. I did drill a hole thru mount though to get a socket and ext. on upper sway bar bushing mount bolt, it is next to impossible to get a wrench or socket on that bolt, and have no idea how UTV inc expects you to tighten this bolt? I also think the aluminum will help act as a heat sync, and help cool it. Hope this helps anyone looking for an option on relocation of the VR.[IMG][IMG]
[/IMG][/IMG] VR mounting locations.[IMG]
[/IMG][IMG]
[/IMG]
[/IMG][/IMG] VR mounting locations.[IMG]
[/IMG][IMG]
[/IMG]Stock headlights
I have stock head lights off of my 2015 sportsman xp 1000 I don’t need anymore. They were removed at 10 miles. Asking $75.00 shipped. Pm with any questions.
Stock headlights
I have stock head lights off of my 2015 sportsman xp 1000 I don’t need anymore. They were removed at 10 miles. Asking $75.00 shipped. Pm with any questions.
2015 Desert Edition Parts
All parts listed on Ebay if anybody interested. 2015 Desert Edition Parts for sale.
JL audio Marine-rated Bluetooth adapter
by far the happiest i have been with my rzr stereo.
just installed a JL Audio MBT-RX hooked to a pyle 2 channel amp with 2 Kicker KM654LCW and i am impressed with it good clear sound and the range is awesome.
i had a JBL PRV-175 mounted in my cup holder and no amp. my biggest complaints were it was super sensitive to battery voltage. had it hooked right to the battery and every time i would start my rzr it would turn off and back on and i would have to re-sync the Bluetooth(major pain). also couldn’t get enough sound out of the speakers to hear them while riding.
now with my new system it connects to my phone automatically, and stays connected even while starting my rzr and the speakers are alot louder and clear.
i wired in 2 switches. 1 switch powers up the amp and the Bluetooth controller and the other switch(mute switch) cuts the power from the first switch to the amp. this allows me to be ripping around and when i come to a stop mute the speakers so i can chat and what not then when i take back off then turn the amp back on and still have the music playing and not have to wait for the Bluetooth to reconnect and push play on my phone.
Rear wheel bearing help!!
Tryin to replace rear wheel bearings on my 2012 Rzr 800.
Have it all taken apart but I can’t get the spindle off the hub… Any advice? Was wanting to take them to work tomorra to press out old and install the new… Any help greatly appreciated!!!
Have it all taken apart but I can’t get the spindle off the hub… Any advice? Was wanting to take them to work tomorra to press out old and install the new… Any help greatly appreciated!!!
