Are the stators on ebay any good half the price of Yamaha? Or am I going to have an issue down the road?
ITP black water review
took my quad up to maine last week and got a LOT of crawling around rocks, stumps and deep deep mud. figured i would give my opinion on what ive found so far. so here it goes
first off i will say 99% of my riding was in low gear hauling logs and lumber through the woods. i went in bud over my floor boards and i totally forgot to put it in 4 wheel drive!!
when i was in the grass and mud. i punched the throttle once…. thats all it took. and the machine stood straight up in the mud! these things bite hard and pull.
i could not tell any difference in the weight at all. but i did notice when i was around 3800 rpm just riding through the woods i thought my tires would be spinning like mad, but they were just crawling through the mud. lots and lots of traction!!
i only put it in high once when i got onto the fire road and it took a little bit.. again im being very very picky. little bit more throttle to get moving. but once i was doing 10mph i could wack the throttle and the machine would rip!
as far as smoothness goes. does not matter the speed at all. it was not rough at all. no handle bar shaking or anything!
overall 100% happy with these and i cant wait to get more high speed miles on them!!!
first off i will say 99% of my riding was in low gear hauling logs and lumber through the woods. i went in bud over my floor boards and i totally forgot to put it in 4 wheel drive!!
when i was in the grass and mud. i punched the throttle once…. thats all it took. and the machine stood straight up in the mud! these things bite hard and pull.
i could not tell any difference in the weight at all. but i did notice when i was around 3800 rpm just riding through the woods i thought my tires would be spinning like mad, but they were just crawling through the mud. lots and lots of traction!!
i only put it in high once when i got onto the fire road and it took a little bit.. again im being very very picky. little bit more throttle to get moving. but once i was doing 10mph i could wack the throttle and the machine would rip!
as far as smoothness goes. does not matter the speed at all. it was not rough at all. no handle bar shaking or anything!
overall 100% happy with these and i cant wait to get more high speed miles on them!!!
ITP black water review
took my quad up to maine last week and got a LOT of crawling around rocks, stumps and deep deep mud. figured i would give my opinion on what ive found so far. so here it goes
first off i will say 99% of my riding was in low gear hauling logs and lumber through the woods. i went in bud over my floor boards and i totally forgot to put it in 4 wheel drive!!
when i was in the grass and mud. i punched the throttle once…. thats all it took. and the machine stood straight up in the mud! these things bite hard and pull.
i could not tell any difference in the weight at all. but i did notice when i was around 3800 rpm just riding through the woods i thought my tires would be spinning like mad, but they were just crawling through the mud. lots and lots of traction!!
i only put it in high once when i got onto the fire road and it took a little bit.. again im being very very picky. little bit more throttle to get moving. but once i was doing 10mph i could wack the throttle and the machine would rip!
as far as smoothness goes. does not matter the speed at all. it was not rough at all. no handle bar shaking or anything!
overall 100% happy with these and i cant wait to get more high speed miles on them!!!
first off i will say 99% of my riding was in low gear hauling logs and lumber through the woods. i went in bud over my floor boards and i totally forgot to put it in 4 wheel drive!!
when i was in the grass and mud. i punched the throttle once…. thats all it took. and the machine stood straight up in the mud! these things bite hard and pull.
i could not tell any difference in the weight at all. but i did notice when i was around 3800 rpm just riding through the woods i thought my tires would be spinning like mad, but they were just crawling through the mud. lots and lots of traction!!
i only put it in high once when i got onto the fire road and it took a little bit.. again im being very very picky. little bit more throttle to get moving. but once i was doing 10mph i could wack the throttle and the machine would rip!
as far as smoothness goes. does not matter the speed at all. it was not rough at all. no handle bar shaking or anything!
overall 100% happy with these and i cant wait to get more high speed miles on them!!!
Youth/kids outlander
Not sure if I’m the only one who ever thought this but why doesn’t brp make a youth kids 90 cc outlander I know they make the ds90 but why can’t they change the plastic and add a rack etc and make a utility style youth quad.
Youth/kids outlander
Not sure if I’m the only one who ever thought this but why doesn’t brp make a youth kids 90 cc outlander I know they make the ds90 but why can’t they change the plastic and add a rack etc and make a utility style youth quad.
And discount codes/Promo going for discount on OE Polaris parts
Gonna buy $800+ worth of OE Polaris parts, prop shaft, frt bearings, all brakes, some ball joints, bushings, etc… at Polaris Parts OEM Free Shipping ATV|Utility|Polaris parts and before I check out. Asking if any promo codes or discount codes…
At this much every little but helps.. Thanks
MSA M12’s on 11 800LE
I have m12’s w 26x9x15/26x11x15 they are worn out n on stock height n suspension n never rubbed. Wanting to put 28x10x15 on all 4 but don’t want to do any lift lots or spacers if possible… There is also a 27x10x15 out there… Will I be ok w the 28’s? Newbe here… Any help will be greatly appricate…. Thank you
MSA M12’s on 11 800LE
I have m12’s w 26x9x15/26x11x15 they are worn out n on stock height n suspension n never rubbed. Wanting to put 28x10x15 on all 4 but don’t want to do any lift lots or spacers if possible… There is also a 27x10x15 out there… Will I be ok w the 28’s? Newbe here… Any help will be greatly appricate…. Thank you
STI Rocktanes
Anyone running or have experience with the STI Rocktane XD 8-Ply Radial tires? Looking at them in the 27X11 and 27X9-14s for my 850. Also got my eye on the Sedona Ripsaw R/Ts in 26".
How aboout pricing? Best prices, anyone?
How aboout pricing? Best prices, anyone?
Bent Valve/ Bad Cam/ OR?
Any help or insight would be greatly appreciated here… I bought a 2012 rzr 800 le eps in january with 910miles. Had it out for a short trip on friday only putting 20 miles on (total now is 960), about 5 miles to the truck I noticed a rattle from the valve cover area, got it home and yesterday I went to do further inspection and it won’t start! I bought it from a dealer as a trade in so no warranty, dealership opens in an hour and I’d like to have some idea of what the issue might be before I lose it on the salesman.
