Just bought the STI HD3 Narrows 6+1 and 26" BH’s for my BNIB 2015 Touring SP… Haven’t even ridden the thing yet but was getting ready to install my new Ricochet skid plates and "heard" a grinding noise…..<sigh>… I had the bars fully turned when it started rubbing..Rubs on both sides…
What should I do now ? Any suggestions ?? :nixweiss:
Hello, I am new to this whole forum thing..
I have a 1993 Honda TRX 350 fourwheel drive and not anywhere online can I find parts for this Atv and it’s driving me insane, so I figured someone on here must know where I can find parts? Anyone knowing anything would sure be great if you could help me out!
Specifically I am looking for a starter, I am wondering if older or newer models have compatible parts?
And yes I am certain that it is a 93 TRX 350 Honda without doubt.
I searched the internet trying to find tips or how too’s, to build a snorkel kit for the ’15 900s, and found there’s not a lot of info out there. I got a lot of good information from BloodyPearl’s thread which you can find here, http://www.rzrforums.net/rzr-s-900/1…kel-build.html , I figured I would post some pictures of my build, to show some extra options.
I will try to post some more pics and info, including a couple of the snorkels removed and glued up to give an idea of a parts list.
Hey guys I registered on here a while back but never posted. Came on here for answers with my atv. Having carb adjustment issues mainly starting to adjust my choke position in order to get a normal idle and not have it die when I try to take off. Been having some bogging issues as well. If anyone can point me in the right direction that would be great. I’ve been diy with my vehicles and now my atv for about a year now. Thanks for reading 🙂
Hey guys I registered on here a while back but never posted. Came on here for answers with my atv. Having carb adjustment issues mainly starting to adjust my choke position in order to get a normal idle and not have it die when I try to take off. Been having some bogging issues as well. If anyone can point me in the right direction that would be great. I’ve been diy with my vehicles and now my atv for about a year now. Thanks for reading 🙂
Wanting to do some maintenance or install a clutch kit on your Polaris RZR XP 900, S 900, XP 1000 or Ranger XP 900 model and need an inexpensive puller? Well here you go! Made in house and heat treated for years of use! This clutch puller will remove the clutch from these models:
Polaris RZR XC 900
Polaris RZR S 900
Polaris RZR 900
Polaris RZR XP 900
Polaris RZR XP 4 900
Polaris RZR XP 1000
Polaris RZR XP 4 1000
Polaris Ranger XP 900
Polaris Ranger XP Crew 900
Will work in place of the OE Polaris 2872085 part number. Also will work on Polaris snowmobiles that use OE Polaris part number 2875567
Got some water in my belt housing while I was washing the RZR. I was checking all the connections in the Intake and Exhaust for the belt and managed to poke a hole in the boot that connects the intake to the motor.:clap::clap: I believe that is the intake side of the system.
I did the DIY snorkel so if there is something else I could use instead that information would be greatly appreciated.
If someone has one laying around and wants to sell it that would be great too.
All the sites I looked at wanted $20 to ship a $3 part and it would take also a week to get.
looks like my little 420 gonna have to compete with the 500’s next weekend . I’m going to put it in a ATV sled pull.
gonna see what the little Honda has got
my sons 2001 sportsman is in need of a new carb. I am looking for one that will work with it. I don’t like the electronic choke or the oil injection. I bought one from eBay and I will never do that again, huge piece of junk. So the factory carb is an mikuni am7 it’s a 19mm carb I believe polaris only part. In 03 I think it was switched to a mikuni vm16. So which brand name carb would work? I’ve seen some for sale at reasonable prices but I’m no expert by any stretch of the imagination so I would really like some help.
