I need to buy a new chain and sprockets for my boys bike and so far I am not sure I am finding the right size chain. Just want to confirm if I purchase the sprockets new from the dealer the chain for the stock sprockets is a 428. I am surprised the online manual does not specify the chain size but his won’t stay on and the adjustment is at the end. I guess that means a lot of good fun has been had!
Honda 300ex shift problem
I have a 93 Honda 300ex. When it shifts it feels stiff. When I shift down it stays down when I shift up it stays in the up position as well. It also won’t go any higher than 2nd gear. But goes into 1st 2nd and neutral no problem. Help would be greatly appreciated!!:icon_gd:
Neoprene roll cage wraps 800/900
I’be seen in some pictures and I’m trying to locate some neoprene wraps for my roll cages 800s and 900xp stock cages, I have thicker summit racing pads but want a nicer look, please let me know where this are because I want them
Thanks
Thanks
Neoprene roll cage wraps 800/900
I’be seen in some pictures and I’m trying to locate some neoprene wraps for my roll cages 800s and 900xp stock cages, I have thicker summit racing pads but want a nicer look, please let me know where this are because I want them
Thanks
Thanks
’86 fourtrax 350 tire ?’s and ring ?’s
So around here its the cool thing to rut out trails so no one can ride them unless you got the clearance. Then you can sit back and talk trash to the people that can’t make it.
I’m not an asshole like that but I still want to make it through the rutted out trails.
I’m being told that my 86 fourtrax 350 can handle 32" tires because of a low gear reduction or whatever.
What’s the tallest tire I can use? Will I lose performance?
Another thing, I’m going to have to get new rings, I’m going to end up boring it 50 over. Will I have a 86 fourtrax 400 then?
2000 polaris xpedition 425 ?
I have a polaris 425 with the 5 speed 9 on it. It has a issue in every gear when first giving it throttle it acts like the clutch slips a bit tthen will act like it catches and goes fine. Is thus a clutch Iissue or carb issue? How do I adjust the clutch
800 EFI wont start no power
First off, I am glad for this forum and any help it can bring me. I went to get my wifes quad ready for this weekend. A 2009 800 EFI. the battery was dead so I tried to jump start it. Not even a click. I bought a new battery and installed it. Turned the key and it lite the panel for one second, then drained the battery. If I put the battery charger on it will light up the instrument panel. but will not click or turn over. I have tried to jump the solenoid and the starter and both try to rotate but not enough juice.
So I think I have a short. something is drawing all my current. Then when I hook up the battery charger the instrument panel will light up but no clicking. Am I on the right track. I am at a lost here, not sure where to go now. I got 3 days to find the issue, or no atving this 5 day weekend.
First Valve Adjustment
Quesion guys, I am pushing 1000 miles on my 2015 1000XP, manuel says 2000 miles on valve adjustment, my dealer says 1000 miles, what is right, thanks for any imput, MADDOGWFO
First Valve Adjustment
Quesion guys, I am pushing 1000 miles on my 2015 1000XP, manuel says 2000 miles on valve adjustment, my dealer says 1000 miles, what is right, thanks for any imput, MADDOGWFO
Help with snorkeling….
I have a 2015 900s an was wondering if any one jas some suggestions on snorkeling it? I was thinking about trying to run strictly through the side vents so i dont have to do any cutting. My question is what all needs to be sealed and done?
Im also not looking to purposely get that deep in water but id like to have the peace of mind knowing i can. Thanks for your help in advance.
Im also not looking to purposely get that deep in water but id like to have the peace of mind knowing i can. Thanks for your help in advance.
