OK came across this story, and got me to wonder, HOW long would you wait for help??
these two women were driving got stuck,, I mean they were a few miles from a town they drove thru to get there?
the road didn’t get any NEW snow, so, they drove in this far, couldn’t be that bad to walk out??
I mean two weeks of waiting there for help??
I would have walked out the same day I got stuck, or till I got cell service and called for help??
Makes me wonder some times??
they were able to drive atv’s in to give them a ride to the heli, so??
Will rims from the 800s fit on the new 2015 900s, or are they a different size pattern? I just want to see before I buy a set. Also any input on a paddle tire to get would be great, and get all four paddle or would two rear be fine?
Thanks for any help!
What size receiver is on this ATV? I need to get an extension bar (about 12") as my garbage can is way to close to the exhaust, and would like to make sure I order the right size.
What size receiver is on this ATV? I need to get an extension bar (about 12") as my garbage can is way to close to the exhaust, and would like to make sure I order the right size.
hi guys was wondering if anybody knows ? 99 500 magnum owned since new and wont start first time this has happened, pulled plug and not getting any spark? wire looks o.k. any ideas would be great. Thanks Doug
hi guys was wondering if anybody knows ? 99 500 magnum owned since new and wont start first time this has happened, pulled plug and not getting any spark? wire looks o.k. any ideas would be great. Thanks Doug
Trying to get inlaws wheeler going. Started out with replacing the starter which burned out. I remember the machine backfiring quite often as it was started previously. After replacing the starter, I started the machine, it backfired and engine ran backwards. I had the CDI checked out and even tried a new one. Have read all previous forums on the subject and No, the key is not sheared off. I have moved the Stator Plate in both directions and can get it started, but still runs backwards. I am at my wits end.
Trying to get inlaws wheeler going. Started out with replacing the starter which burned out. I remember the machine backfiring quite often as it was started previously. After replacing the starter, I started the machine, it backfired and engine ran backwards. I had the CDI checked out and even tried a new one. Have read all previous forums on the subject and No, the key is not sheared off. I have moved the Stator Plate in both directions and can get it started, but still runs backwards. I am at my wits end.
Hi guy’s i have a 99 magnum 500 that i have owned since brand new, first time ever that it wont start, pulled plug and and i am not getting spark, any clues would be helpfull ? Thanks in advance.
