Need ball joint asap

Guys,
I’m in the middle of putting my high clearance arms on and noticed the rubber cup is gone on one of my a arm ball joints. called the dealer and of coarse he doesn’t have them and will take 4 days. He says they are different then every other machine except the 2014 diesel rangers. Can someone help I need to ride this sunday if possible. Does anyone have an aftermarket one crossed over yet.
Thanks
Jody

do I need these skid plate spacers?

Hello all, haven’t stopped in here for a while. Ever since I moved to South FL a few years ago, I haven’t been riding much.

I’ve got Aluminum Products skids. I’ve taken them off plenty of times, but it’s been about 3 years, and I seem to have forgotten how they fit back together. Specifically, the skid plates that go under the foot boards. Each foot board skid plate comes with a few cylinder shaped spacers. However, I’m wondering whether I need them at all? They seem to make the skids seat incorrectly, and they don’t give me enough bolt length to put the washer and nut on.

Any advice? Can I remove them or are they necessary?

Black Rhino/RacerX Sponsored Athlete Jerett Brooks Takes Home First Win Of The Season


“BLACK RHINO/RACERX MOTORSPORTS SPONSORED ATHLETE JERETT BROOKS GETS HIS FIRST WIN OF THE SEASON IN THE LUCAS OIL OFF ROAD RACING SERIES”

05/01/15 El Cajon, CA– Last weekend, Black Rhino/RacerX Motorsports sponsored athlete Jerett Brooks raced in rounds 3 & 4 of the Lucas Oil Off Road Racing Series at Wild Horse Pass Motorsports Park in Chandler, AZ. The rounds were held on Friday and Saturday nights.

In Friday‘s Round 3, Brooks started in row 2 due to no qualifying because of the rain. The first few laps of the race the #77 ran 3rd behind RJ and Brandon Arthur. After RJ broke, Brooks was bumper to bumper with Brandon for the rest of the race up to the point of a caution creating a "green white checkered". When the flag dropped, Brooks ran outside of turn one and was pushed out causing him to drop back to 4th. Coming into the last turn battling for 3rd with Brad Deberti, the trucks were hooked together and the #77 crawled up Deberti’s causing the #77 to roll over. The caution came out again and Brooks was able to roll back over and salvage a 10th place finish.

In Saturday’s Round 4, Brooks qualified first overall and the invert was 2 which placed him in the second row, inside, behind Sheldon Creed to start. Throughout the race, Creed and Brooks kept a 4 car gap until the last lap when the caution came out due to a wreck. This again created a "green white checkered" scenario. When the green flag dropped, Brooks went high into turn 2 passing Creed on the outside which gave Brooks the inside for the next turn and a lead on Creed. Coming into the last turn Creed was on the door of the #77 trying to pass but had to take the low line because Brooks had the inside on the top line which was faster. This allowed Brooks to get his first win of the season!

Jerett Brooks and the #77 ProLite are sponsored by; Black Rhino, Racer X Motorsports, General Tire, Rigid Industries, Walker Evans and Fox Shox. You can follow him on Twitter @jerettbrooks77 and Facebook & Instagram @jerettbrooks.

BLACK RHINO/RACERX MOTORSPORTS

At Black Rhino Inc. and Racer X Motorsports, we have a passion for all forms of motorsports that is unmatched by anyone in our industry. From communications to safety, tear down to prep, providing fuel stations to race support, we meet the racers needs. We offer tons of products for ALL Side X Sides and a full showroom and website for your shopping convenience. We have a full service and installation center, an on-site fabricator, and a sales staff that is ready to help make your dream Side X Side a reality. Visit us today at 9303 Bond Ave. El Cajon, Ca. 92021 or log onto our website at Black Rhino Performance – Black Rhino Performance. You can also visit them on Facebook at www.facebook.com/BlackRhinoFanPage.

Black Rhino: Setting the trend for today’s EXTREME Side X Sides.

2006 fleetwood scorpion s-1 toyhauler

Shower, sink, hot water heater and water tank
Queen and twin bed
Small couch
3 way fridge/freezer
Stove, oven, and microwave
Ac and furnace
Stereo
Generator
Battery and solar panel
Twin propane with switch
12′ bed with fold down sides
Front rack with storage box
Leveling jacks
Electric brakes
$6999 obo
Located in Normangee Tx
email @ cj_bell01@yahoo.com or pm if interested or for more pictures

Attached Thumbnails

Click image for larger version

Name:	0530141908 (2).jpg
Views:	N/A
Size:	284.9 KB
ID:	133234
 

Attention forum

Hi my name is Brock and I recently purchased a 2015 Renegade 1000xxc. I had come acrosed a company called dress up bolts and contacted them via Facebook to see if they would be interested in making a kit for my gade. The answer was yes but they would need to get their hands on one locally in Lynchburg Va and I am located in Wisconsin. So anybody on here located close by and be willing to help this project out. Add me on facebook Brock Ingison their website is Titanium Engine Bay Dress Up Bolt Kits have a look

Wet clutch drum needle bearing

My clutch drum was burnt so I ordered another one but have a question about the difference between the new and old drum. The needle bearing in the old drum is held in with a circlip. The new drum doesn’t have the ring cut into it where the circlip would sit. Do I need to put the needle bearing in the new drum without the circlip or is the bearing not needed anymore?

Attached Thumbnails

Click image for larger version

Name:	image.jpg
Views:	N/A
Size:	1.14 MB
ID:	20263
 

Chains designed for your personality!

Visit Us On FacebookVisit Us On TwitterVisit Us On YoutubeVisit Us On LinkedinCheck Our Feed