So the question is of course barkers is better, but how much better?
I plan on at least a 700 top end in the distant future if that helps.
I have no firsthand experience with either of these so I need help comparing.
If the barkers is that much better I’ll hold out for one.
Does anyone have a 15 XP1000 header they’re willing to send me? I’ll gladly cover shipping and will return to you my non-coated OEM header once the coated one is back on my rig and making music!
I know this is a reach, but I’m sure you can all appreciate not wanting to give up riding for 3-5 weeks!
My reason for doing this is primarily aesthetics – I cannot stand my machine looking like its 10 years old when its only 10 hrs old, but with the mud we ride here in West GA and East AL, there’s no hope for keeping it looking good. I believe the Jet Hot header coating will keep things looking spic and span, nevermind keep the temps in the rear down a few degrees.
If there’s a better solution, I’m all ears!! Thanks!
Does anyone have a 15 XP1000 header they’re willing to send me? If so, I’ll gladly get mine cleaned up and will exchange it with you or pass it on to the next guy or gal wanting to do the same as soon as mine is back from NC.
I’m in West Georgia. THANKS!!
Does anyone have a 15 XP1000 header they’re willing to send me? If so, I’ll gladly get mine cleaned up and will exchange it with you or pass it on to the next guy or gal wanting to do the same as soon as mine is back from NC.
I’m in West Georgia. THANKS!!
New member here from Southern Illinois. Just bought a new Foreman 4×4 with eps. I have had several "older" atv’s, and this is my first one that I bought new.
I found the forum and thought it might be a good source of information.
I have a Totron 30" radius double row light bar and want to mount it underneath the OEM sunvisor and can’t for the life of me figure out which mounts will work. I’ve looked at the Axia Alloys page but nothing jumps out at me as the silver bullet on which mounts to use.
I WANT to use brackets that attach to the cage uprights and not the horizontal bar between A-pillars for fear that I’ll have to cut/trim the visor. If this isn’t possible, I’ll do the latter.
Can anyone tell me what to use???? Thanks in advance!
I have a Totron 30" radius double row light bar and want to mount it underneath the OEM sunvisor and can’t for the life of me figure out which mounts will work. I’ve looked at the Axia Alloys page but nothing jumps out at me as the silver bullet on which mounts to use.
I WANT to use brackets that attach to the cage uprights and not the horizontal bar between A-pillars for fear that I’ll have to cut/trim the visor. If this isn’t possible, I’ll do the latter.
Can anyone tell me what to use???? Thanks in advance!
Any Ideas?
Any Ideas?
