I have a 2009 grizzly 700 … while on a ride the power steering would cut out and fight when trying to turn left I stopped the bike and shut it off and then turned the bars back and forth … when I started up again and continued rideing there was no further problems .. anyone have any idea what caused this thanks
All posts by dstech
Ignition coil dead, very common?
Going to get a new multimeter to confirm but pretty sure my coil is dead or barely working.
Started fine yesterday then today it started for a few seconds with a very low weak idle then died and ever since it’ll crank and backfire once in awhile, exhaust has smoke coming out, fuel pressure and fuel quality is good. Unplugged my programmer and no change. Unplugged the wires from the coil and the backfiring stopped. I also cleaned the grounds, checked the air filter etc..
I sprayed some ether to it and same thing it’ll backfire and smoke but won’t fire the cylinders. The spark plugs are ngk iridiums with maybe 250 miles.
Started fine yesterday then today it started for a few seconds with a very low weak idle then died and ever since it’ll crank and backfire once in awhile, exhaust has smoke coming out, fuel pressure and fuel quality is good. Unplugged my programmer and no change. Unplugged the wires from the coil and the backfiring stopped. I also cleaned the grounds, checked the air filter etc..
I sprayed some ether to it and same thing it’ll backfire and smoke but won’t fire the cylinders. The spark plugs are ngk iridiums with maybe 250 miles.
Last weekend I went to disney, ok and had zero problems. Anyone been thru this or something similar? Doing a search I didn’t really pull up much about bad coils.
Dalton weight bushings where to buy
Have a used dalton clutch kit and they weight bushings are kinda tore up and can’t find replacements anywhere
2016 turbo seats
Two sets of seats from 2016 turbos. One set is black and orange and the other set is black and white. Both sets were taken out when new.
Does not include sliders, bases or hardware.
$200 per set shipped.
2000trx350te idles then dies
I have a 2002 rancher 350 es with a brand new fuel tank, petcock, OEM Carb, Primary and secondary air filter. It will start and idle fine but when you give it fuel it wants to bog out and die. Is this a fuel air mixture problem possibly? I checked for air leaks from where carb goes into the engine using ether to see if it picks up and seems there are no air leaks. I have read that to adjust the air fuel mixture that it is on the pin in the plunger that needs to be moved. Just want a second thought on this. Also the fuel in it is non ethanol fuel and fresh. Fuel flow is also good from tank to carb.. Thanks for any help you guys can give in advance…
02Trx350te_guy
2000trx350te idles then dies
I have a 2002 rancher 350 es with a brand new fuel tank, petcock, OEM Carb, Primary and secondary air filter. It will start and idle fine but when you give it fuel it wants to bog out and die. Is this a fuel air mixture problem possibly? I checked for air leaks from where carb goes into the engine using ether to see if it picks up and seems there are no air leaks. I have read that to adjust the air fuel mixture that it is on the pin in the plunger that needs to be moved. Just want a second thought on this. Also the fuel in it is non ethanol fuel and fresh. Fuel flow is also good from tank to carb.. Thanks for any help you guys can give in advance…
02Trx350te_guy
2000trx350te idles then dies
I have a 2002 rancher 350 es with a brand new fuel tank, petcock, OEM Carb, Primary and secondary air filter. It will start and idle fine but when you give it fuel it wants to bog out and die. Is this a fuel air mixture problem possibly? I checked for air leaks from where carb goes into the engine using ether to see if it picks up and seems there are no air leaks. I have read that to adjust the air fuel mixture that it is on the pin in the plunger that needs to be moved. Just want a second thought on this. Also the fuel in it is non ethanol fuel and fresh. Fuel flow is also good from tank to carb.. Thanks for any help you guys can give in advance…
02Trx350te_guy
New 1020 renegade
Quite the upgrade from my 2010 outty 840. Hopefully this one does the job! Will be getting a few more goodies and I’ll update you guys as I go. Including a custom rad relocate! 
What fuel do you run
Which fuel do you run in your grizzly? I am fortunate enough to run chevron 94 octane no ethanol and do you guys put fuel stabilizer in it when not using over the winter months? Thanks
Deleting 450 swaybar?
So i was rideing the other day and cut the boot on my sway bar endlink. Was wondering how these handle with it removed or should i fix it,thanks.2014 450
