Located in Florida (Tampa Bay Area) Well cared for.
Independent Rear Suspension for a soft smooth ride,
Fully automatic transmission or switch over push button shifting.
High & Low gear.
Electronic 4×4 with Front Differential Lock.
Front & Rear disk brakes.
Extras:
STI HD3 Alloy Wheels, wrapped in Mega Mayhem Tires.
Custom extended powder-coated rear rack with Yeti tie-downs.
Designed for Yeti 35, will also work with smaller Yeti 20 Roadie or Igloo sportsman or similar.
Low hours & mileage. Under 47 Hours.
New Infant & Demanding Career forces sale.
Reduced to $6,800 For quick sale. sorry, NO TRADES. Motivated Seller, make a reasonable offer.
I have a 99 xplorer 300 4×4 Does anyone know where I can find a performance exhaust for my ATV or any mods I can do to make mine a litter faster…not looking to have a super machine just wanting a few more HP’s
I nee to replace all wheel bearings. I have searched and saw mentions of Kawasaki bearings being the same for much better price, but I had no luck finding exact part numbers or links for my model.
Any recommendations on best option, be it OEM/Kawasaki or aftermarket, would be great!
So I put this together for anyone who upgraded their factory shocks on the Can-Am Gen 2 650 XMR, 2015 800 XMR and for Renegade/Outlander owners who have these shocks. These are the BRP Catalog Fox Racing Podium shocks you can buy at the dealer.
The issue I ran into is that after a year the shocks started to sag and I was faced with putting spring spacers on them, this was till someone mentioned in a facebook forum about swapping springs. So I swapped the original XMR springs on to the Fox Podium springs.
Fox Podium springs = Can-Am Gen 2 Renegade XXC Springs
Factory 800 XMR Springs = Can-Am Gen 2 650/800 XMR Springs
Result is my sag is gone now, I’m back to 13.5" of ground clearance in front and I now have 14.25" of ground clearance in rear. I will say the ride is back to being XMR like but I need to give it some time to settle in as well.
This is a great upgrade for those wanting to gain ground clearance but not give up travel and do it with Factory parts. Yes a set of Elka’s tailored to my machine, weight, riding style would be the correct way to solve the problem, but this was a free option for me and I hope it might help others.
So I put this together for anyone who upgraded their factory shocks on the Can-Am Gen 2 650 XMR, 2015 800 XMR and for Renegade/Outlander owners who have these shocks. These are the BRP Catalog Fox Racing Podium shocks you can buy at the dealer.
The issue I ran into is that after a year the shocks started to sag and I was faced with putting spring spacers on them, this was till someone mentioned in a facebook forum about swapping springs. So I swapped the original XMR springs on to the Fox Podium springs.
Fox Podium springs = Can-Am Gen 2 Renegade XXC Springs
Factory 800 XMR Springs = Can-Am Gen 2 650/800 XMR Springs
Result is my sag is gone now, I’m back to 13.5" of ground clearance in front and I now have 14.25" of ground clearance in rear. I will say the ride is back to being XMR like but I need to give it some time to settle in as well.
This is a great upgrade for those wanting to gain ground clearance but not give up travel and do it with Factory parts. Yes a set of Elka’s tailored to my machine, weight, riding style would be the correct way to solve the problem, but this was a free option for me and I hope it might help others.
Finally got the atv out today. Rode about 10 miles of trail, about half way through started bumping real hard. Got back to the truck and the front shock is shot, leaking majorly. So I’m looking to just replace the 2 front ones as the rear seems to be just fine. Anyone have any suggestions? I’m currently looking at FS-04300.
Atv is a 94 sportsman 400
Thanks in advance
I’m looking for an 09 scrambler 500 service manual. I found one for 1997-2000 model, but none for later manuals. Anybody know if these guides will go along with an 09 scrambler? Or know where I can find one?
Hello I’m a new Grizzly owner and new on this site. I was riding today and the engine just shut down on me. It wouldn’t restart. I thought the overheat button lite up then went off. Then 5 min later it shut down.
Hello I’m a new Grizzly owner and new on this site. I was riding today and the engine just shut down on me. It wouldn’t restart. I thought the overheat button lite up then went off. Then 5 min later it shut down.
Well gentlemen…. this thing is going to be the death of me…. Carb rebuilt, neutral safety switch by passed,CDI box is good. All grounds are good.On a good day it will fire right up and run all day. But somedays it will fire and after I go to try and crank it over again no spark. If anyone has identified the fix to this chronic issue please let me know.
