hey everyone! I’m happy to be a part of the forum. Looking forward to learning many new things and hopefully being able to provide info for some of you as well! I’m relatively new to the world of atv riding, but definitely no stranger to the beautiful outdoors of Colorado. I usually hold nothing back, so if you have a question feel free to ask, other than that I will see you all in the forums! Cheers!
HD Front Springs for 570
Who has HD front spring for the 570 w/struts. Also are the springs on the 570 the same as on the 06 500.
Timing help ASAP
Ok guys major problem here, I’ve watched every video read every thread tried every way, I’m installing a set of super mags
First time I got it done turned it by hand binding, looked rear exhaust valves fully open piston at tdc? Double check, all marks correct not even off 1 tooth
So retimed other way, turned freely, try to start, no go, firing plugs on exhaust stroke, so tear down again, retimed rear cylinder first, than turned counter clockwise until #1 in hole, timed front cylinder up, turned engine over by hand, now front exhaust valves hitting piston
HELP!!! Why what is this issue here
Yes correct cam is in correct spot, lash set properly, timing marks line up every time but still a big issue I need this done asap
First time I got it done turned it by hand binding, looked rear exhaust valves fully open piston at tdc? Double check, all marks correct not even off 1 tooth
So retimed other way, turned freely, try to start, no go, firing plugs on exhaust stroke, so tear down again, retimed rear cylinder first, than turned counter clockwise until #1 in hole, timed front cylinder up, turned engine over by hand, now front exhaust valves hitting piston
HELP!!! Why what is this issue here
Yes correct cam is in correct spot, lash set properly, timing marks line up every time but still a big issue I need this done asap
New 570 starts hard.
Brand new 570. When I turn the key ,on a cold engine, It starts to turn over, seems to go dead for half a second then catches and turns over. Its done it a few times since I bought it last week. The temps have been in the 40s. Im thinking there is no way it will start in real cold weather. I plan on bringing it back to the dealer this week but I was wondering if anyone else had this problem or knows what it is.
Polaris –> Viper Winch….
Hey folks,
Anyone here uninstall a Polaris 2500HD winch and install a Viper??? Just curious as to what a good install time would be…
Did you all use the components from the Polaris for the Viper or what??
Just wanted to know if this is a bring to Dealer install or something a technically inclined friend and I can do!
Thanks in advance!
K
bigbruin
So I just bought an 06 bruin 350 4×4 and I’m haveing rear brake problems. Put new shoes on , new parking brake cable because it was pretty wore. Pumped the pedal until it had good grab so I went for a test ride hit the brakes and they went to the floor. No brake! So I adjusted cables the hand lever and foot had good grab , took it out again and lost them again! What’s left to do, any suggestions?
Outlander 800 check engine oil
New to the site I have a 2011 can am outlander 800 Havin a problem tryin to find some advice on problem check engine oil level light keeps comin out but oil level is fine not sure wat to do any advice would help
Outlander 800 check engine oil
New to the site I have a 2011 can am outlander 800 Havin a problem tryin to find some advice on problem
new member from Wyoming
I live in Cody,Wyoming. I ride a 2008 Outlander Max 650.
new member from Wyoming
I live in Cody,Wyoming. I ride a 2008 Outlander Max 650.
