My trailblazer will pop out of forward gear into neutral with stress put on the machine. All hardware on the shifting linkage is tight. Are there any transmission adjustments that can be made to correct the issue or am I looking at a overhaul?
2010 Trailblazer 330 popping out of forward gear
My trailblazer will pop out of forward gear into neutral with stress put on the machine. All hardware on the shifting linkage is tight. Are there any transmission adjustments that can be made to correct the issue or am I looking at a overhaul?
How are XMR’s lifted compared to XTP’s?
I’ve been trying to figure it out for the life of me. With the two machines side by side, we can’t figure it out. Is it just springs? If so, do the XMR springs on an XTP work well for a lift? The threaded spring adjusters seem to be almost in the same position.
Sent from my iPhone using Tapatalk so please excuse my fat finger syndrome.
How are XMR’s lifted compared to XTP’s?
I’ve been trying to figure it out for the life of me. With the two machines side by side, we can’t figure it out. Is it just springs? If so, do the XMR springs on an XTP work well for a lift? The threaded spring adjusters seem to be almost in the same position.
Sent from my iPhone using Tapatalk so please excuse my fat finger syndrome.
How are XMR’s lifted compared to XTP’s?
I’ve been trying to figure it out for the life of me. With the two machines side by side, we can’t figure it out. Is it just springs? If so, do the XMR springs on an XTP work well for a lift? The threaded spring adjusters seem to be almost in the same position.
Sent from my iPhone using Tapatalk so please excuse my fat finger syndrome.
Exhaust tip
I’m looking for a exhaust tip that will fit the stock exhaust. I just don’t like how the stock one looks. I like how it’s sounds without the stock tip and wandering if adding an after market one will do anything other than get the sound I’m looking for.
07 Outlander 800 cutting out
I have a 07 outlander and when I ride it around and get it to operating temp it likes to cutout when I give it full throttle. I’m thinking it’s the fuel pump but don’t know for sure. I just want to get a second opinion on this before I buy one. And there is no check engine light either when it dose this.
Sent from my iPhone using Tapatalk
07 Outlander 800 cutting out
I have a 07 outlander and when I ride it around and get it to operating temp it likes to cutout when I give it full throttle. I’m thinking it’s the fuel pump but don’t know for sure. I just want to get a second opinion on this before I buy one. And there is no check engine light either when it dose this.
Sent from my iPhone using Tapatalk
2004 Trx250tm valve guide
Hello all
I have a 2004 250 recon that is smoking. I pulled the top end thinking its valve seals or rings and found that the valve guide on the exhaust side is broken cleanly at the base. It still runs great, but smokes.
I know the valve guides are pressed in, but I’m a little worried trying this on my own. The manual also says you need a valve reamer????
Am I looking at a new head or is this something that the average guy and tackle?
I have a 2004 250 recon that is smoking. I pulled the top end thinking its valve seals or rings and found that the valve guide on the exhaust side is broken cleanly at the base. It still runs great, but smokes.
I know the valve guides are pressed in, but I’m a little worried trying this on my own. The manual also says you need a valve reamer????
Am I looking at a new head or is this something that the average guy and tackle?
Outlander 500 L shootout video
Informative comparison/shootout video