I have multiple pieces available off my 2014 RZR 1000 if anyone is interested.
– wheel center cap – $15
– grille – $25
– dash and speedo (red bezel) – $125
– clutch cover – $40
– air intakes – $30
PM if you want more info.
Jerad
Will Fit:
Polaris Ranger 500/800 XP : 2009-10
Polaris Ranger 800 Crew : 2010
It is an all-electric system that uses electronic sensors and an on board computer to drive an electric worm gear motor which is directly connected to the steering system of the ATV UTV.
The system uses a torque sensor to sense the amount of steering done by the rider and transmits this signal to the on board computer which then relays the amount of turning pressure to apply to the steering system.
The inline electric motor not only decreases rider fatigue but also assists in reducing jarring “kick-Backs” from the steering on rutted roads as well as climbing rocky terrain.
All of the system components are sealed to give water and dirt protection in even the roughest riding conditions.
The on board computer has a led light indicator for system diagnosing in case of component failure.
The system is a low maintenance system with only some minor lubrication of the steering shafts required.
The electric motor has an overheating protection built in – it automatically reduces current when reaching damaging temperatures.
Call Today 850-912-4350
Will Fit:
Polaris Ranger 500/800 XP : 2009-10
Polaris Ranger 800 Crew : 2010
It is an all-electric system that uses electronic sensors and an on board computer to drive an electric worm gear motor which is directly connected to the steering system of the ATV UTV.
The system uses a torque sensor to sense the amount of steering done by the rider and transmits this signal to the on board computer which then relays the amount of turning pressure to apply to the steering system.
The inline electric motor not only decreases rider fatigue but also assists in reducing jarring “kick-Backs” from the steering on rutted roads as well as climbing rocky terrain.
All of the system components are sealed to give water and dirt protection in even the roughest riding conditions.
The on board computer has a led light indicator for system diagnosing in case of component failure.
The system is a low maintenance system with only some minor lubrication of the steering shafts required.
The electric motor has an overheating protection built in – it automatically reduces current when reaching damaging temperatures.
Call Today 850-912-4350
Fits: 2008-2014 RZR, RZR-S, and RZR-4
This RZR bumper is like no other on the market today; we took pride in constructing a durable bumper that was not only strong but one that would work with a winch. We put extra support inside the bumper for pulling with a winch; most bumpers in the market today don’t have the support needed for a winch, just check out our features bellow
Features:
Made from 10 (gage steel for extra strength)
Extra support Beams mounted inside the bumper for your winch!!
Powder Coated Black Wrinkle
Top mount winch plate included
Fits: most winches up to 4500 lbs
Stainless Steel Bolts
CNC formed
Made in the USA
30 lbs
Protect your RZR with The best Rock Guards/Nerf Bars in the industry, you will receive two rock guards with this purchase. Wild Boar’s rock guards are designed to help protect the sides and bottom of the machine from damage and debris. These aggressive nerf bars feature a black, powder coat finish that is rugged enough to handle the most intense riders. Features: All mounting hardware is included Detailed instructions Made in the U.S.A Powder Coated If you have any questions please give us a call at 1-888-887-9971
Will fit:
Polaris RZR : 2008+
Polaris RZR S : 2009+
Call Today 850-912-4350
The Wild Boar Front Bumper is like no other on the market today; we took pride in constructing a durable bumper that was not only strong but one that would work with a winch. We put extra support inside the bumper for pulling with a winch; most bumpers in the market today don’t have the support needed for a winch, just check out our features bellow
Features:
Made from 10 (gage steel for extra strength)
Extra support Beams mounted inside the bumper for your winch!!
Powder Coated Black Wrinkle
Top mount winch plate included
Fits: most winches up to 4500 lbs
Stainless Steel Bolts
CNC formed
Made in the USA
30 lbs
Call Today 850-912-4350
The Wild Boar Front Bumper is like no other on the market today; we took pride in constructing a durable bumper that was not only strong but one that would work with a winch. We put extra support inside the bumper for pulling with a winch; most bumpers in the market today don’t have the support needed for a winch, just check out our features bellow
Features:
Made from 10 (gage steel for extra strength)
Extra support Beams mounted inside the bumper for your winch!!
Powder Coated Black Wrinkle
Top mount winch plate included
Fits: most winches up to 4500 lbs
Stainless Steel Bolts
CNC formed
Made in the USA
30 lbs
Call Today 850-912-4350
Started making some changes on it. So far I’ve added a 3500lb Viper "midnight" series winch, ss212 wheels and 26" STI Black Diamonds. Also added a 12v accessory plug but I’m waiting on the Honda plug for it. Got a Boss AT20 audio tube (not pictured) that I’ll install once the plug is wired in. Eventually gonna add a front bumper and rear storage box.
