I have a 2015 Outlander 650 Max XT and I in the market for new tires. I would like to know if anyone has installed Kenda 299 Bear Claw 27 inch on this same machine and if everything was ok. The Kenda tires are a bit wider and with my stock tires I only have about an inch of clearance from my rear tire to the shock. Would like to know before I go ahead and order them.

hi all,

I have a 2011 grizz 450 with only 900 miles. I had it out the other day, had to engange diff lock to climb a muddy hill, and it wouldnt engage, the light was just flashing. so I dis engange it and drive it home. shut it down. today I go out to start it, i have no life from it. turn the key on and nothing happens, no display or anything , the only thing i have done to the electrical system is a year ago i grounded the reverse wire to get full power in reverse. I tested my battery, its nice and full. so where should i start looking maybe for a lose ground? where are grounding locations?
thanks

mark

Hi everyone,new guy here. I have 1998 450 Forman ES that I just replaced the starter relay solenoid but every time I connect the power to the battery the starter won’t stop turning over until I cut the power! Anyone have ANY thoughts on what the problem might be? Thanks in advance

Hi everyone,new guy here. I have 1998 450 Forman ES that I just replaced the starter relay solenoid but every time I connect the power to the battery the starter won’t stop turning over until I cut the power! Anyone have ANY thoughts on what the problem might be? Thanks in advance

i have the 2016 1000 xmr and i put the yoshi on it and i have the ejk tuner on the way was wondering do i need to do anything to the clutch?

I’m thinking about getting a new helmet and have been considering a Dual sport helmet because the Goggles bug the crap out of me most of the time.

I’m wondering if the Dual sports helmets are just going to become fog machines or dust bowls if I’m only using them on the ATVs?

I’d also like some info on decent helmets that don’t cost half a fortune.

I am sure this has probably been posted 1000 times but I can’t get a 100% solid answer like I need before spending the money. I really don’t want to add a lift and spacers and all that if I can avoid it. I am considering 29.5 outlaw 1’s, 28 or 30" silverbacks, or 28 or 30" mudzillas. Can I fit any of these tires on 14" wheels without having to trim or adding anything else? I don’t mind running the shock height up.

The bike is a 2016 in case that matters. Thanks

Just wanted to say hi and maybe I could use some help . Never been on a forum but maybe I’ll get the hang of it I ride a 2015 Honda rancher 420. 4×4 sra and need some tips on bigger tires I have 25" itps but I’m thinking on getting 27" mega IMG_0054.JPG

Attached Thumbnails

 

Just wanted to say hi and maybe I could use some help . Never been on a forum but maybe I’ll get the hang of it I ride a 2015 Honda rancher 420. 4×4 sra and need some tips on bigger tires I have 25" itps but I’m thinking on getting 27" mega IMG_0054.JPG

Attached Thumbnails

 

Hey I can’t find out how to do it myself and who will do it but I want my 420 to turn 28"s easy where do I start I’m kinda new to this