If someone can’t help me out with it. Just gonna kill it with fire. Literally have taken my entire quad apart and cannot find a spot for this plug. Me and my wife looked for about an hour last night and have no clue.
I have a 2002 Polaris Scrambler 90
Quad was givin to me broken and I believe I have everything put back together except this one plug
It is coming from the wiring that connects to the push button starter deal on the handle bars.
By all means I am a one wire kind of guy so please if y’all have an answer dumb it way down for me
Thank you in advance
Pretend a slip on exhaust fell off while you were submerged in about seat level water on a XMR 1000. Leaving now only a straight pipe. Now pretend while you were in the water you were playing around in reverse and drive while WOT and then rapidly letting off the throttle.
With the scenario above would there be any chance of a lot of water getting into the CVT causing belt slipping? I will add that no water was in the clean or dirty drain lines.
I have a 13 Renegade 1000Xxc that I’m about to order new wheels and tires for. The standard set-up I’m looking at has 14" MSA M12 wheels, and 28" Mega Mayhem tires. The rears are 11" wide, and the fronts are 9" wide. I’m really thinking that I’d like the 11" tires front and rear….. but still undecided whether I’m going to like the way it handles-turns with 11’s on the front. I ride mainly technical sand trails at high speeds, and avoid deep mud holes if possible. I know the 11’s are going to put extra load on the front drive line, although I rarely ever ride in 4wd. Looking for advice-thoughts from those with experience on this. Thanks in advance for any advice!
Ok guys I have been looking online for different kits for oil change and lubes
What are you guys using brp oils and filter? What about the air filter what do you guys recommend uni filter or knn I’ve decided on buying race driven pads and rotors as mine are shot. Does the fuel filter need to be changed also? Last question what spark plugs are you using. Stock motor only upgrade
Now is the snorkels thanks in advance!
Man, I’ll tell you what….it’s too tight. Has anyone figured out how to fit a 570 with at least a little room left. And no, I’m not buying a trailer😃
TIA
Does anyone know an easy way to get the axle nut off? It has a pinched in part that I’m not sure I can torque past or do I need to bend it out? Grind it off?
A buddy of mine purchased new Rear tires for his 800 xmr. He went wider and he went with 29.5 Outlaws. The Outlaw tires are about 1" taller now in the rear then the fronts with 29.5 SB. Will this affect anything? He was told it would and asked if I ever heard anything like that. So I thought I would find out.
Thanks.
Hey forum. So recently I had discovered that there was water in my ranchers gas tank. Today I decided to drain everyone out do fill it with fresh fluid and all that. So upon opening the air box I notice a liquid in there and turns out it was gas. I did not know until now that my brother had turned the tab up vertically to wash the bottom of the tab couple days ago. After that I tried cranking it and didn’t turn on. How did the gas get in the air box? How can I fix it. Is it considered to be flooded?
