Know its hard to guess but anyone have a idea what year ATV this is?
Guy had it on our local swap shop online said he was ineterested in trades I through something at him, he accepted pending a quick look over at the shop we have in town but he does not know the year.
He was asking 3500 for the bike. Said motor had been rebuilt, everything works.
the exhausts were the same between 2wd and 4wd for 1993 or every year, right? I’m looking at an aftermarket exhaust on ebay that says just 2wd but i’m assuming the seller doesn’t know.
the exhausts were the same between 2wd and 4wd for 1993 or every year, right? I’m looking at an aftermarket exhaust on ebay that says just 2wd but i’m assuming the seller doesn’t know.
I bought a brand new 2015 Sportsman 1000. Before I even put a mile on it I put 28 inch tires on it with a clutch kit rated for 29.5’s. I added a 2 inch lift, snorkels and relocated the radiator. The first day I rode it I broke the front two axles. I got those fixed and the next week while going through some thick mud, I heard something pop. I thought it was another axle but all four tires were still turning. Then I realized that I had no reverse. My gear selector would not move. I attempted to winch myself out and that freed my gear selector to where I could shift it into low. Now my high and low works just fine but I still don’t have reverse. Any idea what this could be??
bizarre issue this weekend,
the brake fluid seemed to keep expanding…
the left rear brake lever would get harder n harder to pres, finally, u cant press it anymore and the wheels are locked. was going down the road and it locked. i unscrwed the banjo bolt on the master cylinder to release some presure, that worked, but this happened a dozen times or more all day while riding.
why would the brake fluid expand al the sudden?
calipers are fine, not locked or anything. its the fluid, soon as i open release some fluid, it presses fine then later its like its full again and cant press it at all.
I’m looking at getting some new tires for my 550XP. I’m currently purchasing some 14" 4+3 wheels and would like some input on tire size. I would like to go as big as I can without costly mods and of course without rubbing.
Please feel free to share your brand and tire size if you have direct experience.
i have an 06 500 x2, i just put on 27 in. mega myhems. I do some mud riding and its time for a new drive belt. Is an oem belt gonna be good enough? if not i need some experienced suggestions. Thanks.
I noticed today the right rear seal is leaking where axle meets the diff. Can I change the seal without removing the diff? I have a shop manual but doesn’t give info on replacing seals.
08 sportsman 500 efi. I am changing the left rear axle and having ungodly issues with it. First I tried a axle puller.the half shaft split. So tried prying the yoke off the trans to no avail. Even used a little heat with it that was a big no. So took it out side and chained it to a tree drilled 2 holes in the yoke for a bolt to slip through it, and put a chain on it and other end to my truck. The bolt bent. I oiled it up good a couple times, Tonight I lubed it up again and letting it sit overnight,gonna try again in the morning. Am I missing something? I did do a couple gogle searches and tried everything that I found. Anyone have any other suggestions? If I do ever get this off I will be using antisieze and thinking about putting a light coat of silicone around the axle where it meets trans. This is ridiculous.
