hi everyone i have a 2005 polaris 800. my issue is the awd is not working here is what i know.
no voltage at front diff.
awd light on pod works.
jacked up rear end, put tranny in low, turned awd on and the front dont spin.
no codes in system.
front diff ohms out at 26.5 ohms
Went out for a group ride last weekend and partway through after a brief rest the bike wouldn’t start. Normal ride, no water or mud. Towed it back to the trailer and it did start but we shut it off and hasn’t started since. When i turn the key there is nothing, no sounds at all.
No error codes on the computer either. Did some tests with the volt meter and I have 12v at the battery and at the connections to the starter. All the other electrical works fine. Swapped out the relays to make sure that wasn’t the problem as well.
Could it be a bad starter? Is there a seperate solenoid on this machine? I’m stumped and looking for suggestions, i’m fairly handy but need some other ideas please.
Some say Renegade. Some say Arctic Cat. I saw Looney Tunes exhaust pegs that were perfect but cost $110! I want the outer end heel kick up pattern , so the Yamaha oversized ones are out. What’s the best way to go??
I’ve heard many a tale about the curved Renegade stock pegs ($45 on eBay), fitting right in nicely on any 07-15 Grizz footwell. Also hearing that cheaper ArcCat pegs do nicely as well and at less $! What would a Yami GNCC racer such as myself in the making, want to do to properly alleviate the terribly flat and useless stock pegs?? I’d care more for fit-ment issues being less if not nonexistent more so than I care about $29 or $49 either way. Well, with that said, let my maiden voyage here commence! (Talk amongst yasselves). Can’t wait to hear!
Hi all
New to me quad needs work, ball joints, front brakes work if u pumpem prob master or wheel cyl. Rear brakes ng, we will see when we open it up.
I could use some help. Mainly, please steer me to best place to buy parts.
Also I could use exploded views/parts diagrams, with table of part numbers. Anyone have for this yr model?
Thanks fellas
Hi all
New to me quad needs work, ball joints, front brakes work if u pumpem prob master or wheel cyl. Rear brakes ng, we will see when we open it up.
I could use some help. Mainly, please steer me to best place to buy parts.
Also I could use exploded views/parts diagrams, with table of part numbers. Anyone have for this yr model?
Thanks fellas
Hi all,
Thanks for having me.
Ive owned a 07 rancher 420 for a while, no problems except she is an oil burner, was like that when I got it.
Picked up an02 foreman rubicon that needs work, hopefully it will turn out ok, could use it on my farm in KY.
Thanks in advance for any help in sorting my headaches. Lol
What do you guys think?
16 570…have had it for 2 months
Got it stock…
Have added
2" bracket lift
Triangle atv snorkel kit
3500# winch
Back seat
Wild boar radiator relocate kit
29.5x10x14 terminator tires Is on hd wheels
