When several of us ride together we ask all to ride with the headlights on so we can see each other thru the dust. On my old RZR I had some "Audi style" lights I put in the headlight housing. I just bought a 900 s and want a few single LED To let others see me in the mirror without the Brite of the headlights. Any ideas?
driving in water
hello all, I am new to atv world . we have 2 brand new 4 wheelers. one is 420 rancher eps and the other is 250 recon. it has been raining here for about a week now and we are dying to get out and play but worried about getting a little to deep. I am not talking about looking for it but incase we encounter some on a trail. what is safe on stock 4 wheelers? the owners manual says 10 inches but I bet the put that in there to cover there butts. or is that correct? thanks
Solenoid look correct?
I have a 99 sportsman 500. I bought a new starter and starter solenoid from DB electrical. Can anyone confirm that this will work and do what it’s supposed to? Attachment 24575Thanks.
UTV INC Polaris RZR S 900 Roll Cage
Front drive shaft won’t come out.. Any tricks?
Removed the 13mm bolt that holds the d/s to the through shaft.. Slipped the d/s back and can get it off the splines.. But I can’t pull it out of the way. The d/s won’t move enough to pull it away from the through shaft..
Is the rubber coupling keeping the d/s from moving back far enough? Or is there something im missing? I know you don’t have to pull the front diff so Id prefer not too. When I pull the yoke off the splines and try to flip it up to clear the splines.. The edge of the yoke catches the part of through shaft.
Front drive shaft won’t come out.. Any tricks?
Removed the 13mm bolt that holds the d/s to the through shaft.. Slipped the d/s back and can get it off the splines.. But I can’t pull it out of the way. The d/s won’t move enough to pull it away from the through shaft..
Is the rubber coupling keeping the d/s from moving back far enough? Or is there something im missing? I know you don’t have to pull the front diff so Id prefer not too. When I pull the yoke off the splines and try to flip it up to clear the splines.. The edge of the yoke catches the part of through shaft.
approached Professor Kawchuk with
approached Professor Kawchuk with
RZR 1000 Driveline
I am looking for a complete front driveline for a 2015 RZR 1000. Even if you replaced it do to vibration.
Richard
Richard
Fixing broke Len on speedo’s
I recently bought a 2009 Polaris Sportsman 500. Only downfall was the lens on the speedo was half broken out. I thought no biggie, I’ll just replace the lens. Then I realized you have to replace to whole thing, or so I thought. Went online looking for solutions. After a lot of research, I found a product called Weld On 4. It’s used to "weld" plastics together. Not just glue, but chemically bond, and seal the joint. Well tonight I successfully fixed the lens on my speedo, for all of about $25. Bought a piece of Acrylic plexi-glass ($10), and the Weld On 4 was $14 shipped, with applicator for the job. Just thought you guys might be interested in saving a ton of cash! Good luck!
