Any RZR rallies going on Memorial Day? I know everywhere will be packed but I like to see all the bikes and have some planned activities. I live in Oklahoma but don’t mind driving for a good time. Looking for family friendly places with lots of bikes. Thanks Jack
Rally’s for Memorial Day
Any RZR rallies going on Memorial Day? I know everywhere will be packed but I like to see all the bikes and have some planned activities. I live in Oklahoma but don’t mind driving for a good time. Looking for family friendly places with lots of bikes. Thanks Jack
Razor fox shock replacement bushings!
I need new bushings for my fox shocks as they are really worn out. I’m looking at super daves tuff shock bushing kit. It asks if all 8 bolts are the same size or the rear has bigger bolts than the front. Not sure which kit to order? It’s a 2010 800 S.
Razor fox shock replacement bushings!
I need new bushings for my fox shocks as they are really worn out. I’m looking at super daves tuff shock bushing kit. It asks if all 8 bolts are the same size or the rear has bigger bolts than the front. Not sure which kit to order? It’s a 2010 800 S.
need more fuel?
I have an 85 TRX 250. It has been sitting for years so I just rebuilt the carb and cleaned out the fuel tank, new air filter, etc. It is sluggish to respond when I give it hard throttle and it doesn’t have enough power to climb a relatively steep hill in low gear. I can have the throttle maxed out and it will just slow to a stop. It runs well on flat ground but cannot maintain speed in high gear. Seems like it just isn’t getting enough fuel. I have the main carb jet backed out 2 3/8 turns from closed as recommnded. Any suggestions? Thanks.
need more fuel?
I have an 85 TRX 250. It has been sitting for years so I just rebuilt the carb and cleaned out the fuel tank, new air filter, etc. It is sluggish to respond when I give it hard throttle and it doesn’t have enough power to climb a relatively steep hill in low gear. I can have the throttle maxed out and it will just slow to a stop. It runs well on flat ground but cannot maintain speed in high gear. Seems like it just isn’t getting enough fuel. I have the main carb jet backed out 2 3/8 turns from closed as recommnded. Any suggestions? Thanks.
Transmission/clutch noises
Ok so guys I’ve posted a few threads lately but I especially need your input on this. My 2013 rancher 420 is the at model (dual clutch tranny) and when I am going about 40 and press on the brakes hard it makes a noise in the tranny like it is trying to catch up in the gearing. It does this in both manual and auto. My dad’s teryx will make a similar noise when letting off the gas so I was just wondering if this was normal or something wrong with the dual clutch or my tranny? Thanks guys.
Transmission/clutch noises
Ok so guys I’ve posted a few threads lately but I especially need your input on this. My 2013 rancher 420 is the at model (dual clutch tranny) and when I am going about 40 and press on the brakes hard it makes a noise in the tranny like it is trying to catch up in the gearing. It does this in both manual and auto. My dad’s teryx will make a similar noise when letting off the gas so I was just wondering if this was normal or something wrong with the dual clutch or my tranny? Thanks guys.
Has anyone used Niche Tuff axles?
I installed two new rear Niche Tuff axles and made it about ten miles before I lost a cv joint!! I contacted the seller they said that they would send me a new one. Two weeks later nothing. More E-mails and calls still nothing. While waiting I ordered a new one from American CV. Installed that one. made it about 1/2 hr into ride and started hearing clunking from the other Niche axle.
Monday will try to contact Niche for refund. I don’t know if it will do any good but worth a try. In the the mean time waiting on another American.
Should of known better with the brand name Niche:rm_thumbdown:
Has anyone used Niche Tuff axles?
I installed two new rear Niche Tuff axles and made it about ten miles before I lost a cv joint!! I contacted the seller they said that they would send me a new one. Two weeks later nothing. More E-mails and calls still nothing. While waiting I ordered a new one from American CV. Installed that one. made it about 1/2 hr into ride and started hearing clunking from the other Niche axle.
Monday will try to contact Niche for refund. I don’t know if it will do any good but worth a try. In the the mean time waiting on another American.
Should of known better with the brand name Niche:rm_thumbdown:
