Just bought a 2006 sportsman 800, mostly to work around home as I never seem to have time for fun. I’ve changed all the fluids, spark plugs and fuel filte so I have a benchmark as to when they have been done. Does anyone suggest anything else. Also I noticed I have a cracked sidewall on one if my tires that is leaking so I’ll need tires it has 26x8R12 front and 26x11R12 back. What other sizes could I use? I don’t need big tires just practical options. Doe the numbers represent height, width and rim?

I noticed today that my rad fan is coming on almost immediately even when cold. I seem to have misplaced my owners manual and I am away from my 2016 570l at the moment. Where in the heck is the coolant bottle? I checked under the fenders and could not locate it but I have not yet pulled any of the plastics. Thank in advance!

I have a 2016 570 Sportsman. I wanted to upgrade tires so i’m ordering some new Bear claws…. But then I started looking at wheels and you know how that goes…lol.
Anyway I kept seeing cheap sets of RZR wheels around so I grabbed a set and painted them. (I paint cars for a living)

Here’s my new to me wheels…

and with new paint.

OK I have a 93 fourtrax 300 4×2 got it cleaned the carb out new plug new gas cleaned the tank out new oil and filter rebuilt the card rode it a week ago ran and shifted great today we got it out and it didn’t wanna full throttle like normal and when it did while riding it it sounded really bad like rattling I checked the carb oil level it idles fine but just doesn’t want to run wide open like it should and when it does it rattles really bad and doesn’t seen to have any power please help

Clemson vs Florida State Live Streaming

Texas A&M vs New Mexico State Live Streaming

Nebraska vs Wisconsin Live Streaming

Kansas vs Oklahoma Live Streaming

Did 90 throttle cable, runs great, was wondering if jetting needs to be done to get rid of hesitation at initial full throttle hit? Ease into throttle, runs great. Also does the gray wore these talk about really do anything if cut? If so where is it?
Anyone done any clutch work or gearing to these?
Thanks

I have a 2007 450 grizzly, it has a new battery all connections have been cleaned all it will do is click when you try to start it. I can jump across the starter relay and turn the engine over, have not tried to start it this way though. where the harness plugs into the relay all 4 wires are hot when switch is turned on, that seems odd to me.
Thanks for any help

I have a 2015 Yamaha Grizzly 700 EPS with 300 miles on it. The clutch spins until you engage into gear, as soon as it is in gear the machine cuts off. Any help with this would greatly be appreciated.

Hey, I am new to the forum so if I am posting in the wrong area just let me know.

I purchase a kimpex backseat for my 2013 Sportsman 500 HO and was looking for advice on installation.

Thanks,