My son’s 2wd 420 foot shift model has started making a roaring noise coming from transmission. Got worse over the last day or so. When you get a Lil speed and push and hold shifter down the noise stops till u release shifter and it goes back into gear. It shifts and pulls through all gears great.

My son’s 2wd 420 foot shift model has started making a roaring noise coming from transmission. Got worse over the last day or so. When you get a Lil speed and push and hold shifter down the noise stops till u release shifter and it goes back into gear. It shifts and pulls through all gears great.

Hi there, I just joined the forum as I bought a nearly new (370 km) 2016 Grizzly yesterday for a bit of a steal. I’m looking to take the nearly new 27" Zillas off my sportsman and put them on the Grizzly. The tires are 27×9 and 27×11. Will they fit on the stock steel wheels without spacers? There seems to be a lot of clearance in the Grizzly but I just want to make sure they won’t be rubbing on anything.

I also need to keep this thing under 50" as that’s the width of my trailer. I didn’t even think of that until now. I was planning on buying a new trailer in the spring when add a RZR to the fleet but was hoping to get by with the 4×8 trailer for now. I suppose I can always put it in my truck if need be.

I also assume I’ll have to do something with the clutching. I’ve read a bit about the spacer mod for the clutch. From what I gather a 1.5mm spacer should do the trick. Let me know if thats not right.

Thanks!

Hi Guys

I have a problem with my display, it seems the odometer resets every time I turn the key off, the hour counter seems to work, it has like 770 hours on it, and resets to that number when the key is turned off…

I am also trying to program the service interval and changing from Mph to Kmh (sorry guy I am European 🙂 )I can chance with the button, and the display flashes and stops indicating the programming worked, but it never works, and always go back to the setting before…

I am wondering if anyone has had the same problem, and if maybe there is a way to make a "hard reset" of the computer, or whatever it is..

I am new to Polaris, bought the 2006 sportsman 800 as a non runner, its now running fine but this problem bugs me….

thanks

Klaus

Box has seen better days but it still works well. It has some heat damage on a corner but has been running like this for over 300 miles. PM for pics
100 dollars shipped

I am new to the forum and am rebuilding a 1986 200 sx. The electrical all worked fine and the bike would start until I installed a slightly larger 12 volt battery, then it all shut own electrically. The aTV will run by pull start with switch on, but no lights, starter, indicator lights come on. Also, I did check and replace the main fuse.

Any ideas or suggestions.
Thanks,
Jim

Just got a brand new 2016 Rancher es model and have not even put half a mile on it. Went to load it on the trailer to take out and the PGM-FI indicator is blinking (2 slow blinks and then 3 fast). Was planning on taking back to dealer Monday but was wondering if there is anything I can try before having to drive 40 miles each way. Thanks guys

I bought a 1992 Honda fourtarx 2×4 about 3 months ago. I had to put a battery in it, new 12amh battery, a reg/ret and new tires. I love it runs great. A friend has a Warn vantage 2000 winch with steel wire in the box like new. I can get it cheap. does anyone know if my atv elec. system will handle the load? Thanks

Trail tires for my XMR 1000 without losing speed I was thinking of going to a big horn opinions??What size?

Sent from my SM-G935V using Tapatalk

Hey there guys I’m new to the Can-Am world I’m purchasing and XMR 1000 on Monday morning I am going to buy some trail tires for trail riding I need to know your guyses opinion what do I need to do to not to lose any speed I would like to stay the same just go to a trail Tire I was thinking of a 30-inch Bighorn let me know your opinion thanks

Sent from my SM-G935V using Tapatalk