Category Archives: RZR XP 900

xp900 2014 leak down results!!!

Hi
bought 900xp 130h smelling fuel from the exhaust and every 100mile losing a 200ml of engine oil. no smoke and spark plugs clean.
performed a leak down test. cyl 1: 5% leak and cyl 2: 17% leak.
does i need a top end rebuild?? what you thinks friends??

Fabricators: Ideas on how best to fix my bent A-arm Tabs

A-Arm mounting tabs on my XP900 are bent. Most of the holes are egged out as well.

I’m thinking stepped washers won’t be enough as a few of my tabs are bent pretty good. Thinking about the UTV INC weld in 15pc kit. (UTV INC POLARIS RZR XP 900 15 PIECE STEEL FRONT WELD ON GUSSET KIT)

Here are a couple of pictures. Any suggestions on the best way to straighten up the bent tabs before adding the gusset kit? I can use a torch to apply heat but not sure how best to apply pressure due to the small/tight space. Thoughts?

Or any other suggestions on a better solution? Thanks!

Attached Thumbnails

Click image for larger version

Name:	FullSizeRender 19.jpg
Views:	N/A
Size:	1.46 MB
ID:	180473
 

Click image for larger version

Name:	IMG_3064.JPG
Views:	N/A
Size:	2.19 MB
ID:	180481
 

Click image for larger version

Name:	IMG_3055.JPG
Views:	N/A
Size:	1.96 MB
ID:	180489
 

Click image for larger version

Name:	IMG_3053.JPG
Views:	N/A
Size:	1.79 MB
ID:	180497
 

Click image for larger version

Name:	IMG_3059.JPG
Views:	N/A
Size:	1.70 MB
ID:	180505
 

Fabricators: Ideas on how best to fix my bent A-arm Tabs

A-Arm mounting tabs on my XP900 are bent. Most of the holes are egged out as well.

I’m thinking stepped washers won’t be enough as a few of my tabs are bent pretty good. Thinking about the UTV INC weld in 15pc kit. (UTV INC POLARIS RZR XP 900 15 PIECE STEEL FRONT WELD ON GUSSET KIT)

Here are a couple of pictures. Any suggestions on the best way to straighten up the bent tabs before adding the gusset kit? I can use a torch to apply heat but not sure how best to apply pressure due to the small/tight space. Thoughts?

Or any other suggestions on a better solution? Thanks!

Attached Thumbnails

Click image for larger version

Name:	FullSizeRender 19.jpg
Views:	N/A
Size:	1.46 MB
ID:	180473
 

Click image for larger version

Name:	IMG_3064.JPG
Views:	N/A
Size:	2.19 MB
ID:	180481
 

Click image for larger version

Name:	IMG_3055.JPG
Views:	N/A
Size:	1.96 MB
ID:	180489
 

Click image for larger version

Name:	IMG_3053.JPG
Views:	N/A
Size:	1.79 MB
ID:	180497
 

Click image for larger version

Name:	IMG_3059.JPG
Views:	N/A
Size:	1.70 MB
ID:	180505
 

Super atv radiators super cheap

Hey gang just thought I would post this up Super atv Is selling their radiators right now for 50 bucks with free shipping! not a bad idea to have a spare onhand! Not sure how many they have onhand but I just ordered one myself

Alba stage 2 cams valve lash

I recently purchased a Alba stage 2 kit with a 935cc BBK. I would like some feedback on the valve lash. Not sure that 2.60 for both intake and exhaust is right. Any help is appreciated.

Current:
Intake. Exhaust
2.45 shim. 2.25 shim
.012 clearance .26 clearance

New:
Intake. Exhaust
2.60 shim. 2.60
.006 clearance .012 clearance

2014 XP 900 oil leak

Hello all, I was working around the shock on my XP 900 today and noticed oil on the skid plate under the motor, I can’t tell where it is coming from so I figured I would take a couple pictures and see if anyone else has had a problem similar to this before I go digging too deep. It’s kind of hard to tell in the pictures where it’s coming from, just thought they may have a common place on that side of the motor where it could be leaking. Thanks in advance

RandyAttachment 177209Attachment 177217Attachment 177225

Attached Thumbnails

Click image for larger version

Name:	ImageUploadedByRZRForums.net1452707692.815036.jpg
Views:	N/A
Size:	349.6 KB
ID:	177209
 

Click image for larger version

Name:	ImageUploadedByRZRForums.net1452707714.657267.jpg
Views:	N/A
Size:	378.7 KB
ID:	177217
 

Click image for larger version

Name:	ImageUploadedByRZRForums.net1452707740.769130.jpg
Views:	N/A
Size:	381.6 KB
ID:	177225