My 2009 sportsman 800 needs a t bap wire harness. Other than that i thought i should replace the plug(s) 2 i think and spark plug wire, clean out the throttle body and replace the fuel filter (does it have one) i never seen it. What else do i need for a tune up.
Thx Jack
Last year I purchased a 2015 Polaris 570. It does not have an engine braking system. I’m very satisfied with the machine. I recently purchased a 2016 Polaris 570 that comes with the EBS Engine Braking System. My first ride was a 42 mile loop in an Idaho mountain area. I was very disappointed with the braking system. It locked the wheels on the downhills. I am 66 years old and have ridden motorcycles and ATV’s my entire life. I raced moto-cross in my younger years. I would consider the Engine Braking System on the 570’s to be dangerous for someone with limited ATV experience. I have returned the 570 to the dealer, and am waiting a reply from the factory. Hopefully, something can be done to disable the EBS.
Due to having major back surgery a few years ago i had to sell my 2004 sportsman 500 ho so now im trying to get back into wheeling again with a 2016 570 .. i enjoy trail riding ether solo or with others. ill see how winter goes and the ice conditions but in any case im planning on using it for ice fishing.:Thinkingof_:
Hello recently found a nice big red just like i grew up on except that one ran, when I test the new solenoid with test light on either wire, neutral light comes on but will not come on without that connection made.
Trying to get my old 200SX running again. Ran a few years back and then wouldn’t start. Just disassembled and cleaned the carb. Poked all the holes out with welding tip cleaners and blew out with air. Reassembled and it won’t start. I am getting gas, as it overflows out the drain tube. Tried starter fluid and it will start on that, but doesn’t seem to be getting gas in the cylinder.
Took carb back apart and recleaned the seat and needle. Also carb cleaner in all the nooks n crannies again. Back on and still same.
3rd times got to be the charm.. nope still overflows. Spark plug is dry, gas overflows and drains out bottom.
Carb is currently apart again. I blow in the gas inlet hose and is clear, raise up on the float and valve works as it should. I can’t seem to find the problem between gas in carb and gas getting in the cylinder to go boom! If the float valve isn’t seating and allowing the overflow, wouldn’t it still have gas to start? Any help appreciated.
I have 2015 Canam 650 xt was wondering what size tire you could run I’m looking at 26x9x12 front and rear 26x12x12 was wondering if I would have rub issues on shock area in rear tires look like zillas thanks
I have 12 outty 800r efi xt and i need a right front brake caliper and am on a tight budget so i was looking at aftermarket calipers but need to get it going so i can go hunting!!!! Also any thoughts on All Balls wheel bearings and what brake pads you reccomend????? THANK YOU FOR ANY INFO
any info on where i can get any of these at a good price i would much appreciate!!
