Just saying hello from Ontario. I just signed up and am trying to figure out the site so just bare with me lol. I have a 01 trx450es and a 05 rincon 650.

I’m riding my grizzly at st joe park on 11/11/16. Let me know if your going to be there. First time at the park or any park. Most of the time I ride at my farm or on the county roads around this.

Hey outlaws, As I promised , I have this 1986 trx350 fourtrax sitting in my back yard waiting for my spec touch. I should be able to start the tear down on her tomorrow ?, got to finish my warn winch install, then get my ’03 trx450fm out of my shop, then I can roll this old, beaten up, road hard, put up wet gal in for a complete full tear down. what you see now ?, will not be her in a few months !!!..lol. this is going to be a very long project, as I never skip details, I will go through every nut and bolt before, during, and after before she will roll out of my shop, then I will put her up for sale. not sure on price yet ?, as I don’t know what all I have to do, to make her a solid old girl again ?..lol. but I can say this ?..SHE WILL BE ONE VERY NICE LOOKING ATV WHEN I AM DONE !. I am sure most of ya’ll know I always turn out great looking, and great running atvs ?, if your new around here ?, then stay tuned to this thread in the next few months, as you will see work in progress !..lol.

Attached Thumbnails

 

 

 

 

 

Hey outlaws, As I promised , I have this 1986 trx350 fourtrax sitting in my back yard waiting for my spec touch. I should be able to start the tear down on her tomorrow ?, got to finish my warn winch install, then get my ’03 trx450fm out of my shop, then I can roll this old, beaten up, road hard, put up wet gal in for a complete full tear down. what you see now ?, will not be her in a few months !!!..lol. this is going to be a very long project, as I never skip details, I will go through every nut and bolt before, during, and after before she will roll out of my shop, then I will put her up for sale. not sure on price yet ?, as I don’t know what all I have to do, to make her a solid old girl again ?..lol. but I can say this ?..SHE WILL BE ONE VERY NICE LOOKING ATV WHEN I AM DONE !. I am sure most of ya’ll know I always turn out great looking, and great running atvs ?, if your new around here ?, then stay tuned to this thread in the next few months, as you will see work in progress !..lol.

Attached Thumbnails

 

 

 

 

 

For Sale is a Brand New "In the Box" Can Cooker Original. Also included is the Can Cooker Rack which retails from $9.99-$15.00 (FREE FROM ME). I have an extra unneeded one that I received. Only time it has been out of the box was to take pictures. Normally retails for $89.95 w/free shipping from some retailers while others will offer a lower retail price but tack on shipping costs. This one is $75 flat and ready to be picked up. It’s a $100-$155 value for only $70. Here is some info on the Can Cooker. (Cover not shown but is included).

Description
CanCooker is a new, unique outdoor cooking device that allows you to cook a lot of food without a lot of work. CanCooker makes a complete meal, that will feed a group of hungry people, in about one hour. Best of all, CanCooker works on any heat source — campfire, camp stove, propane stove, charcoal or gas grill, turkey fryer, stove top, etc and it’s easy to clean up! This makes CanCooker ideal for camping, hunting, fishing, tailgating, family gatherings.

CanCooker is an updated version of the old cream can which was used by farmers/ranchers to cook a hot, hearty and homemade meal while everyone worked. CanCooker cooks with steam so it’s healthy. Each recipe includes twelve or more ounces of liquid which the heat source turns to steam. CanCooker’s revolutionary one-piece "shouldered" design creates convection which circulates the steam for faster cooking. The circulating steam also helps keep food from sticking to the inside of the CanCooker which makes clean up remarkably easy!

The food that comes out of CanCooker is fresh and very flavorful and it maintains its natural flavor better than other forms of cooking. This is because the steam does not leach away the flavors and nutrients. Everything comes out tender and tasty. Nothing comes out dry. Because CanCooker is so easy to use (load it, place it on the heat source and wait about an hour) you’ll be able to play or socialize instead of cooking the meal. And, the food comes out piping hot and ready to eat.

Premium high temperature silicone gasket
Riveted, heavy-duty handles
Safety clamps hold lid in place
Vented lid-for pressure release
Wide mouth design for easy stocking and removal of food

Attached Thumbnails

 

 

 

 

 

Brand new, make an offer if you have interest

Brand new, make an offer if you have interest

I have a new grizzly, I know its new and all,the question is does the shifter get easier to shift from one gear setting to another or is there a place some grease would help?

HELP !!!!!

I have a 2008 Honda Fourtrax ES, fl light flashes 9 times when I turn key on, and at times stays solid red when I drive the bike. Sometimes it will go off, but then flash and come one again. Recently, the bike now shuts off when idling. Have to turn bike off and restart. Any ideas please?

So I’ve pretty much rebuilt my 06 recon 250 engine and got the timing dead on, not bad for a rookie. When I bought it, the original muffler had been hollowed out. After the rebuild I put that same crappy muffler back on it and it ran great but it was pretty loud. The seller gave me another muffler with it but it wasn’t for the recon, though it is a honda muffler. The pipe is bigger and shaped different but the muffler itself is the same shape and size. I managed to fabricate new mounts for it, cut and mended the 2 different size pipes together and installed the better looking, quieter muffler. Problem: The engine didn’t run the same. Stalled out as soon as it started. Even after somewhat warming up and a little tweaking of the idle screw it still seemed to struggle to stay running. Is it possible that there’s too much back pressure with the newer muffler or do I just need to make some adjustments? It’s obviously from a bigger engine hence the bigger pipe. I’m a bit apprehensive about keeping it running out of fear of damaging the newly rebuilt engine. Any advice is greatly appreciated!!!