2014 sportsman 850 i am looking for anyone has the pieces that go in the front diff that the axles spline into. My pieces have deep seal groves and i have hard time keeping it front from leaking i have replaced seals 2 times. i can not see paying polaris $600 dollars for these. so if anyone has a parts diff and can spare these pieces that do not have any grooves in them then please message me asap

So I was looking to buy an 850 xp that is gray color it has 5,000 miles and 492 hours. The dealer wants 5,500 dollars for it. Is that to much money and is that a lot of hours on an ATV? Does that ATV have a lot of life left in it? It was owned by a 60 year old guy who did great maintenance and there are very little scratches on the body and nothing damaged.

Is that a good buy or to much money i am a bit worried with the hours, and miles.

Hello everybody,

So I am attempting to remove a starter asembly from a 2004 Honda Foreman 450FEA. I have removed the cover, the two mounting screws and the electrical connection. I was able to slide the starter out approximately half an inch before it stopped. I tried prying a little between the starter and engine housing but no go. My fear is something inside is screwed up. Has anyone else had a problem such as this? Any help would appreciated.

Sorry i been gone a while so i am blowing up the new threads lol

ok has anyone installed a rear winch in the storage compartment area and I was wondering what key areas need to be braced and welded to prevent any kind of failure. And possibly does anyone make a kit to brace up the frame

Has anybody used a stater from ebay on their griz 700? Does it work well? Oem is like 345.00, ebay adv. plug n play ones for 69.00 and a Moose one for 169.00 but is non-oem worth it?

Sent from my iPhone using Tapatalk

Has anybody used a stater from ebay on their griz 700? Does it work well? Oem is like 345.00, ebay adv. plug n play ones for 69.00 and a Moose one for 169.00 but is non-oem worth it?

Sent from my iPhone using Tapatalk

Has anybody used a stater from ebay on their griz 700? Does it work well? Oem is like 345.00, ebay adv. plug n play ones for 69.00 and a Moose one for 169.00 but is non-oem worth it?

Sent from my iPhone using Tapatalk

Good morning I have a 07 sportsman 450 in the shop and it looses spark after running for about 5 minutes then dies. Check for spark and I have none if you let it sit over night it might start but as of quitting time Friday it had nothing battery is brand new and fully charged put a new trigger coil in it started and ran then it died again same thing no spark put a new logic box in it still nothing changed the CDI box still no spark I have gone through and cleaned all the grounds ohmed the trigger coil just to make sure I didn’t get a bad one I ohmed the stator and I get .3ohms and the book calls for 0.43 but not sure if that’s and issue or not I am stuck not sure what to do now I’m at a loss.Does the speedo unit have anything to do with it ? Any help would be greatly appreciated also before I forget it is carburetor

Hi all;
I’m a new member here, just bought a 1998 Grizzly 600. It needs some TLC and I’m up for the challenge. I primarily need it for farm work – riding in the fields checking fencelines and hauling a trailer with firewood and chainsaws, etc. Its a one owner machine – it was owned by my late SO’s father, so now is my time to get it fixed up.
I’m interested in learning about the whole machine, and I plan on adding a new skin on it and some other items to make it "girly" if there is such a thing. :icon_ goofy:
I look forward to reading all about my "new" Grizzly here on the forum!
Ohiogal

Has anyone had any thoughts or experience with the rad kits from Rogue Offroad?
https://www.rogueoff-road.com/collec…elocate-bumper