I am in the need of a GPS for trail riding and had a couple questions. All I am looking for is something I can download trails onto so that as I’m riding I can look down and see where I am on the trail and what way I would like to go. Doing a quick search on the forums I see many people say the Montana is the way to go but I guess I’m wondering if there is a cheaper Garmin that would do the things I need? Any help/advice would be appreciated.

This is the best tool I have ever purchased in my tool box. Its takes ATV tires off with just a 3/8 ratchet. That being said I have only used it on steel rims. Anybody ever us this on their Can-Am aluminum rims? Forums are about sharing so I thought I would share.

Hi. New to the forum, so I hope I’m doing this right.
I have a 2003 Honda foreman 500
Actually, I have 2 of them.
I’m Having issues with one. It starts right up using the pull start.
But, when I try the e start all I can hear is the solenoid click. I’ve used a booster pack as well as other batteries and jumper cables.
I’ve also taken the solenoid out of it and put it on my other Honda and it started right up, so I know it’s not the solenoid .
If the starter is shot would the solenoid just click like it is?
Should I remove the starter and put power directly to it and see if it spins?
Or is their something else I should look at first ?
Thanks in advance

I have a 2015 Polaris Sportsman 570 and bought the Polaris winch with it. I’ve only used the winch 1 time over the past year. Now when I try to use the winch it only clicks….any ideas what could be bad or what I should check? I’m wondering if the winch is bad??

Tony

I have a 2015 Polaris Sportsman 570 and bought the Polaris winch with it. I’ve only used the winch 1 time over the past year. Now when I try to use the winch it only clicks….any ideas what could be bad or what I should check? I’m wondering if the winch is bad??

Tony

Is it possible to get this to work on a 2014/2015 Grizzly 700?
Just wondering if the Meter Assembly is a carry over from the previous year and it would use the same hookup and the dimension is the same to be used in the the 2016 headlight pod/fairing.
I haven’t really seen it yet or cross referenced any part numbers.

Hello all,

I have a Honda Center Headlight On/Off Switch, Part Number: 08E75-HP0-100A, the specs say that it is used on the 2005 & 2006 TRX500 Foreman’s but does not show that it is used on the 2005 TRX500FA (Rubicon) so I was wondering if anyone has successfully put this cable and switch on the wiring harness of a 2005 or 2006 TRX500FA (Rubicon)?

Thanks!

Attached Thumbnails

 

Anyone know why my exhaust sounds like there is a bird in it chirping? See video.

My neighbor had a 2005 Honda Rincon 650 that has been sitting in his backyard for about 3-4 years. I recently acquired it and am attempting to get it going. I immediately changed the oil, replaced the battery, spark plug, air filter, and removed the carb. The carb had what looked like dried molasses inside of it. I purchased a new jet kit and cleaned the mess out of it. I then replaced all the jets and put it back in place. I first put carb on and it ran ok but then began leaking out the overflow. I again removed the carb and took the bowl off to find more junk had come loose. I removed the jets and cleaned everything again. The float needle began to move freely so I put everything back on. Bam, it cranked up and all is good at idle.

Problem comes at about t 3/4 throttle. It began to die. So I read to screw the fuel/air mixture screw all the way in and back it out 2 1/2 turns. Then adjust but shouldn’t need more than 3 1/2 turns out. At about 2 3/4 turns it seems to run the best. Good at idle, then at 3/4 throttle it begins to miss. No black smoke, No backfire, just skip and miss. Any help would be greatly appreciated.

Has anyone used Dalton Springs or clutches? Can you give some feedback? I have heard of the name before but cant seem to find many reviews of the products. Im looking at the DPPS-B/T primary spring for my Highlifter Sportsman.