anyone have a used snorkel kit for cheap its about $289 online then $50 for shipping plus exchange rate which comes to $450 which i cant afford that atm msg me wat ur asking
Tag Archives: Around the Water Cooler
87 fourtrax 250
I have a completely sealed tight snorkel on my 87 fourtrax 250 with a 350 carb on it when I get into deep water it tries to lose power and cut off until I pick the back of it up. What would cause it to do that? I was thinking the exhaust doesn’t have enough pressure when it’s under. Need advice on how to fix it fast! Thanks in advance
oem exhaust
just wondering if anyone has an oem full exhaust for a 2009 850 xp? I have a big gun evo that I would trade, with programmer. I personally love it but it is just to loud for the little ones now. At 4 and 2 years of age its just too much.
New guy with Rincon problem
Good day all. I’m in need of an olive branch here. My loved 2007 Rincons rear
Diff sounds terrible…..(grinding while riding at slow speed). Got off to quickly
Investigate only to see oil leaking from the right rear diff seal. I’m sure the bearing along with seal are finished. Skills are limited and after a little research came up with a plan…..
1—remove both rear drive shafts
2—remove side cover of diff
3—remove the RR. RING (41T) I think it’s also called the (crown gear)
4—expose and attempt to remove the bad bearing without removing the pinion
5—start feeling nervous about getting in over my head!!!
I’m feeling OK about the disassembling portion except that pinion part scares me. Is it terrible not to change out the pinion bearings and seals if they seam to be good? Is this even possible to do without removing the pinion. I haven’t started anything yet….figured I should get some friendly advise on what to be careful of.
Diff sounds terrible…..(grinding while riding at slow speed). Got off to quickly
Investigate only to see oil leaking from the right rear diff seal. I’m sure the bearing along with seal are finished. Skills are limited and after a little research came up with a plan…..
1—remove both rear drive shafts
2—remove side cover of diff
3—remove the RR. RING (41T) I think it’s also called the (crown gear)
4—expose and attempt to remove the bad bearing without removing the pinion
5—start feeling nervous about getting in over my head!!!
I’m feeling OK about the disassembling portion except that pinion part scares me. Is it terrible not to change out the pinion bearings and seals if they seam to be good? Is this even possible to do without removing the pinion. I haven’t started anything yet….figured I should get some friendly advise on what to be careful of.
570 wheels
I know what I want but I don’t know what size I need. I want 27" maxxis Zillow on my 2015 sportsman 570. Can someone please lead me in the right direction as to a decent tire and wheel size combination?
570 wheels
I know what I want but I don’t know what size I need. I want 27" maxxis Zillow on my 2015 sportsman 570. Can someone please lead me in the right direction as to a decent tire and wheel size combination?
**2000 400ex Won’t Start Now (Has Fuel, Spark & Compression)**
I have a 2000 400ex that I ended up with (long story).. It was rebuilt by previous guy right before I took it on a trade deal.. I have video of it running and the day I picked it up it fired and idled for minute or so.. Didn’t want to run it to long being no airbox on it.. Get it home and now can’t get it to run..
I finally did today get it to start for brief second and than it died and hasn’t started since.. Pulled the plug in wire 10 x and always shows good spark when I check it, plug is wet from fuel, pulled carb and it will shoot fuel if you hit throttle, ran and grabbed a good compression checker and showed 180psi with throttle open on cold motor..
I am at a complete loss here.. Only thing is I don’t have a NGK plug in it.. Parts store didn’t have one so cross referenced to a Autolight plug.. Grabbed can of starting fluid to see if that would boost it any.. No luck..
Thanks
Warn Provantage Snow Blade
Should read "Snow Plow"…I got one of these sitting in my garage, new in the boxes everything you need to install and use. Will never use it myself, as I head South every winter.
$375.00 will take it.
$375.00 will take it.
Help! How to check codes!
Is there anyway to check the engine codesubmission on a p7 Sportsman 80p efi without taking it to a dealer?
Help! How to check codes!
Is there anyway to check the engine codesubmission on a p7 Sportsman 80p efi without taking it to a dealer?