Florence county opens tomorrow the 23rd,Marinette county opens saturday the 30th

Looking at tires just to play in mud holes I’m thinking of 27/9/12 on all four wheels atv is a 2015 outlander I don’t want to do a lift anyone have any input or ideas

I have a 2016 Polaris 450 ho. It is a 567cc and the dealer says the difference between this and a 570 is a tune in the ecu. I bought a 570 ranger ecu and now nobody will program it for me and I am stuck with a ecu I cant use now any suggestions?

I have a 2014 renegade and I just noticed the tail lights where on and the screen was on say communication failure… I crank the bike then killed it and min. Later it did it again now the taillights and screen just flicker on and off?? What should I check??

Hello so I need some help. I have a 2000 scrambler 400. When I bought it, it only had 60 LBS of compression so i replaced the piston and rings. Then the carb was leaking so i rebuilt the carb, and replaced the reed cage and valves. Now it that when i open the throttle up that it is getting stuck. Ill even hit the kill switch and take the key out and the bike will still be running at 3/4 open.
PLEASE HELP!

I have a 2014 570 Sportsman EPS with a 3500lb Polaris winch on it. Yesterday I had issues with it only reeling in. My neighbor and I troubleshot it and found the solenoid is bad for the release portion of the winch. Is there an aftermarket solenoid that will work, Polaris wants $100 for it, but I have found some on Amazon for half that. Just not sure if they are one in the same.

I have a 1000 outlander on 29.5 outlaw 2s with exhaust and a programmer. stm 3p and stm secondary. When I received my stuff from stm and installed it my shiftout was 6850. Pulled the arms out of the primary and they had 4 grams on the middle dowel and 10 grams on the top. I removed the 4 grams on the middle and my shiftout is only still about 7000 rpms. Any suggestions….Thanks

How do I perform a test on the fuel cut relay to see If its working? I already tested the plug going to it for power and I tested the fuel pump where it plugs in coming from there.Don’t want to replace it if it’s working. Any help would be greatly appreciated, thank you Pete…