Need to get at the starter solenoid and starter of a 2007 Sportsman 500 EFI. Hands large enough that the rear clip is going to have to come off.
Have found Polaris plastic rivet and a tool to grab them on Amazon.
What do I need to know about removing old ones and installing new ones?
Thank you VERY much!
Mike
Need to get at the starter solenoid and starter of a 2007 Sportsman 500 EFI. Hands large enough that the rear clip is going to have to come off.
Have found Polaris plastic rivet and a tool to grab them on Amazon.
What do I need to know about removing old ones and installing new ones?
Thank you VERY much!
Mike
Get Ready! The July 2016 Polaris ATV of the month contest is starting RIGHT NOW! This month we are looking for the best photo that features your Polaris ATV. So get out there, get creative, enjoy some safe riding and take some photos! We welcome everyone including vendors to participate. The winner of the contest is decided by you the community, so stick around for the voting process.
- The photo must be posted in this thread.
- Only one picture will be allowed, so make it your best!
- You must be the owner of the Polaris ATV.
- Please include a description of your ATV with a list of all modifications and enhancements.
- You can only win once every 12 months
Voting will begin around July 15th, 2016 and run to the end of the month. Once the voting ends we will publish the winning photos on the front page and the winners will also receive:
- PolarisATVForums Stickers
- Premium Membership
- $25 Gift Card
- Your bike will be featured on the home page of the site
Get Ready! The July 2016 Polaris ATV of the month contest is starting RIGHT NOW! This month we are looking for the best photo that features your Polaris ATV. So get out there, get creative, enjoy some safe riding and take some photos! We welcome everyone including vendors to participate. The winner of the contest is decided by you the community, so stick around for the voting process.
- The photo must be posted in this thread.
- Only one picture will be allowed, so make it your best!
- You must be the owner of the Polaris ATV.
- Please include a description of your ATV with a list of all modifications and enhancements.
- You can only win once every 12 months
Voting will begin around July 15th, 2016 and run to the end of the month. Once the voting ends we will publish the winning photos on the front page and the winners will also receive:
- PolarisATVForums Stickers
- Premium Membership
- $25 Gift Card
- Your bike will be featured on the home page of the site
hard2want719
2014 Polaris Scrambler XP850 LE in VooDoo Blue
EPS & Fox Shocks
26x9x14 Sedona Buzzsaws with STI HD6 Wheels
Ricochet A-arm skids
Polaris Handguards
Cecco Frame Braces
Bel-Ray Moto Chill coolant
Lots of rustoleum blue paint
hard2want719
2014 Polaris Scrambler XP850 LE in VooDoo Blue
EPS & Fox Shocks
26x9x14 Sedona Buzzsaws with STI HD6 Wheels
Ricochet A-arm skids
Polaris Handguards
Cecco Frame Braces
Bel-Ray Moto Chill coolant
Lots of rustoleum blue paint
I do have the shop service manual and it has some usefull information under the engine management section. I have followed it and found the following results.
Fuse 4-good
Fuse 7-good
Fuse 8- cannot find
Diode 1-good
Swaped relay 1 and 2 no change
The manual then states to check ecm connector B for 12vdc. I check pin 11 as it states is the positive power supply, i have no power at pin 11. Pin 1 is the ground and i ran a continuity test on pin 1 to ground, there is continuity so i believe my issues is with pin 11 the 12vdc power supply pin.
Also please note i cannot find fuse F8.
The only other fuses i can find are 2 x 30 amp fuses which are enclosed in a black case near the back of the bike which i believe are to be for the charging system.
Any advice would be appreciated as i really do not feel like opening my wireing harness and chasing wires.
Thanks
Sent from my LG-H831 using Tapatalk
