2008 ranger crew? What do I have to remove to get front drive shaft out? Universal joints are free, pin out. Can’t figure if it needs to come out the front or rear. Thanks
I’m really liking the looks of the wildboar front bumper for my G2. Can anyone comment on the functionality and durability of it? I’m afraid the winch mount will bottom out or get buried in a rut
Looking for a video on installing a Terra 3500 on a 2015 Rubicon if anyone has a link to one or a thread about it…I assume a 3500 is plenty for the Rubicon.
Looking for a set of shocks for my 2015 SP1000 Touring. It is my understanding that the Scrambler and Sportsman are the same chassis. I also assume that the touring is same as well?
I have found a good used set of Fox shocks that are off of a 2009/2010 Sportsman 850 and am looking to make sure that the fitment will be correct?
I received a letter yesterday that the gear case pinion covers are officially under recall if you have front gear case part # 1333569 . if you have gearcase part # 1333693 you are already updated.
looks like I need to schedule a new front cover/pinion shaft update kit which is the solution if you have the older front gear case.
I have a brand new, never been used OEM radiator fan. Fits 2008-2013 Grizzly 700’s and maybe more. $245 new, asking $150 OBRO, shipped to the lower 48. PM if interested.
Hi guys
Just took my bike in to have the valves adjusted. I got a call from them asking if my bike has ever been swamped.
It has! When I swamped it, It did not hydro lock on me. I changed the oil like 10 x in the bike.
They told me that they did a compression test and the Front cylinder was at 140 lbs of pressure and the Rear cylinder was at 80 lbs. The bike seems to run fine.
The last time I had it out, I had over heating issues with it. As soon as it would get hot and my temp light come on, I would shut it down or drive it in the lake to cool it off.
Thats a whole other story. Anyways I’m just wondering If i’m looking at a rebuild or if I should just ride it and see what happens!
I’m interested in knowing if anyone has had a similar problem.
Been chasing an annoying issue with my idle/throttle cable.
Problem:
-Idle changes with the bars being turned.
-Zero play at the thumb throttle, if adjusted within spec, bike does not idle.
-ETC is not the problem.
-Cable is routed correct and moves freely (cleaned and lubed)
My assumption is:
-My throttle cable is adjusted too tight to compensate, opening the throttle body and acting as an idle screw.
-Loosing that play causes the idle to raise and lower with the movement of the bars.
-My throttle stop set screw isn’t adjusted properly making it useless. Now the bike is idling off of the throttle cable setting.
I can only find references to the "Air Flow" screw in the Service Manual. Is that the same as the Throttle stop set screw as it also makes mention of this screw in the diagnostic section? I feel like it isn’t and don’t want to mess with the Air Flow screw as it’s tied into the TPS.
