Was wondering what kind of belt life ur getting out of ur 1000

Looking at replacing front axles and I have 2 choices, Honda half shafts or east lake complete axles, I run stock wheels and tires.
Let me know the good the bad and the ugly. Which way would you go?

Sent from my iPad using Tapatalk

Looking at replacing front axles and I have 2 choices, Honda half shafts or east lake complete axles, I run stock wheels and tires.
Let me know the good the bad and the ugly. Which way would you go?

Sent from my iPad using Tapatalk

I have a few pictures I took of my 04 Honda Foreman 450 4×4. Can anyone tell me if I need to replace this and/or what’s it for? I’m a novice mechanic so where does it go? Can I replace or shop will have too?

Thanks in advance!

Attached Thumbnails

 

 

 

I have a few pictures I took of my 04 Honda Foreman 450 4×4. Can anyone tell me if I need to replace this and/or what’s it for? I’m a novice mechanic so where does it go? Can I replace or shop will have too?

Thanks in advance!

Attached Thumbnails

 

 

 

Hi guys I have a 2003 Sportsman 600 and I got a 2500LB Badlands winch for it. I got my front end all apart and have got it mounted now I’m ready to wire it up.

Two questions:

1) is there a detailed guide around? I have read enough to feel OK to attempt it but it seems like this must have been done so many times that there would be some clear guidance for it.

2) does anyone ever wire up a second battery (winch to be used with a plow)?
a guy a few roads over I see his ATV with a big car battery on the front rack, he said he had wired the winch to that battery and then that battery basically to the alternator so that he says it charges the secondary battery while he’s plowing. I assume he did this to reduce the chances of the ATV not starting a day after heavy winch use and the battery levels are low. I have a powersport battery on my motorcycle i could take off and use for the winter if anyone thinks it’s wise?

Thanks guys

Hi guys I have a 2003 Sportsman 600 and I got a 2500LB Badlands winch for it. I got my front end all apart and have got it mounted now I’m ready to wire it up.

Two questions:

1) is there a detailed guide around? I have read enough to feel OK to attempt it but it seems like this must have been done so many times that there would be some clear guidance for it.

2) does anyone ever wire up a second battery (winch to be used with a plow)?
a guy a few roads over I see his ATV with a big car battery on the front rack, he said he had wired the winch to that battery and then that battery basically to the alternator so that he says it charges the secondary battery while he’s plowing. I assume he did this to reduce the chances of the ATV not starting a day after heavy winch use and the battery levels are low. I have a powersport battery on my motorcycle i could take off and use for the winter if anyone thinks it’s wise?

Thanks guys

It has been discussed on here multiple times to where if you are having trailer sway or a white knuckle tow, chances are you may be running too low of hitch weight, resulting a bad trailer balance. Here is a simple 13 second video that helps show what happens with bad front to back trailer balance.

Take 13 seconds to watch this. It could save your life.* – GIF on Imgur

Everyone be safe out there!

my 2000 fourtrax 300 4×4 runs really well for about 10 minutes then it loses all power and will idle but not allow me to rev my engine or it dies.. could it be over heating.. i dont know much about the fourtrax and i know that this isnt much info but its all i know right at the minute

Hey. Anyone going to brimstone next weekend, October 14? Me and a few buddies are looking to ride with a few others.

Sent from my HTC6525LVW using Tapatalk