Hello, i am putting 400l engine back together after replacing the counter balance. Was just wondering if anyone had the torque specs for the case half, and water pump nuts.

Thanks

Sent from my SM-G900V using Tapatalk

ATV Television Long Term Test – 2016 Can Am Defender @ 700 Miles – VideoSite99.Com

Sent from my iPhone using Tapatalk Pro

I had to replace the stator in my low mileage/run time grizzly a year or so ago,haven’t done much riding since then.(its used for plowing snow and deer hunting,didn’t get much snow last winter) So I didn’t find out about this issue until last weekend when i took the atv to go do property maintenance and put up new deer stands.

I had to replace the stator with what i remember correctly a "rm" stator? It was a aftermarket brand. Anyways I am getting a oil leak where the wires come through the grommet that seal the stator housing. Anyone else have this issue? Whats the proper way of fixing this?

For right now i cleaned it up the best i could with carb cleaner and applied a generous amount of black rtv gasket maker.I understand this is just a bandaid but i have to have the atv operating the 2nd week of November.

I tried doing a search for stator and stator leak but came up with nothing that matches my problem.

I had to replace the stator in my low mileage/run time grizzly a year or so ago,haven’t done much riding since then.(its used for plowing snow and deer hunting,didn’t get much snow last winter) So I didn’t find out about this issue until last weekend when i took the atv to go do property maintenance and put up new deer stands.

I had to replace the stator with what i remember correctly a "rm" stator? It was a aftermarket brand. Anyways I am getting a oil leak where the wires come through the grommet that seal the stator housing. Anyone else have this issue? Whats the proper way of fixing this?

For right now i cleaned it up the best i could with carb cleaner and applied a generous amount of black rtv gasket maker.I understand this is just a bandaid but i have to have the atv operating the 2nd week of November.

I tried doing a search for stator and stator leak but came up with nothing that matches my problem.

I have a 2000 kodiak 400 4×4. Ive looked all over and cant find the answer im looking for on the: Final Drive Shaft
Push-button, On-Command 2WD/4WD. In 4WD is this a locker in the front? It feels like it but im not sure if its a locker or limited slip.
Any help would be greatly appreciated. And thanks in advance.

Alright I have a question about my 2007 Honda foreman 500, I recently bought it an the people that I bought it from took the top motor mount completely off for some reason an I didn’t see that it wasn’t there so we rode an rode it well finally it wore out the both lover motor mounts and I was wondering mistress of buying new ones i could swap them. I have a 2003 Honda rancher 350 with good motor mounts, are the motor mounts the same ? I know they didn’t change them that much. Couldn’t find anything on google about so if you have any info please let me know. Thank you!

Alright I have a question about my 2007 Honda foreman 500, I recently bought it an the people that I bought it from took the top motor mount completely off for some reason an I didn’t see that it wasn’t there so we rode an rode it well finally it wore out the both lover motor mounts and I was wondering mistress of buying new ones i could swap them. I have a 2003 Honda rancher 350 with good motor mounts, are the motor mounts the same ? I know they didn’t change them that much. Couldn’t find anything on google about so if you have any info please let me know. Thank you!

Trying to figure out how to adjust the toe on a second atv. The manual says toe should be Toe-out: 30 ± 15 m. I don’t know what this means. I have used c clamps to attach 2 carpenter squares together and have put marks on the tire and have rotated it 180 degrees. It is toed in right now. does the 15mm mean it should be 15mm difference between the front measurement and the rear? Front being wider to make it toe out?

My shop where I store my ATV flooded this weekend due to Hurricane Matthew. We had about 3′ of water than didnt recede for about 3 hours. Im currently in the process of draining all of the fluids and so far it doesnt appear water made it into anything. How sealed are these things?

I am going to have to replace the air filter and all of the fluids. Should I purchase everything from the dealer? Im new to ATVs and havent even done the first service yet. Only ridden it about 5 times since I purchased it. Should I take it to the dealer and have them do everything?