So I have a 06 foreman 500s with a hmf performance series exhaust and jet kit i installed the snorkel myself yesterday I used two 1 1/2" 45s about 18 inches of straight 1 1/2" PVC coming out of the air box, then I used a rubber coupler to convert from 1 1/2" to 2" I used about a foot of 2 " a 2" 90 a little more 2" and then 45 I goes straight up about 2 feet and then a 2" 90 on the end. I will be driving down the road at any speed consistent throttle for about 2-4 minutes and it’ll start sputtering and die, it takes me about 5 minutes to get it running again and then it just repeats (smells like it’s flooding) if anyone has any idea why it’s doing this please reply. I also plugged the overflow on the carb and extended the vent lines.

So I have a 06 foreman 500s with a hmf performance series exhaust and jet kit i installed the snorkel myself yesterday I used two 1 1/2" 45s about 18 inches of straight 1 1/2" PVC coming out of the air box, then I used a rubber coupler to convert from 1 1/2" to 2" I used about a foot of 2 " a 2" 90 a little more 2" and then 45 I goes straight up about 2 feet and then a 2" 90 on the end. I will be driving down the road at any speed consistent throttle for about 2-4 minutes and it’ll start sputtering and die, it takes me about 5 minutes to get it running again and then it just repeats (smells like it’s flooding) if anyone has any idea why it’s doing this please reply. I also plugged the overflow on the carb and extended the vent lines.