As the title says I’m looking to fit some newer 250 fenders on my 300ex. Is this a direct fit? I’ve tried looking it up but no luck it seems… my back fender is melted from the exhaust and it’s bugging me some
Thanks,
Sebastian

Hi guys,
My plastic is really faded on my ATV in places and I want to paint it Black with Monster Energy green rims and racks and put the Monster Energy logo and their racing team number on it. I also know that to paint the plastic, I can’s use regular paint as it wont stick (Plus I have tried on a 3 wheeler and the paint didn’t stick). So what kind of paint do I need? Also, how do you prep the old plastic for paint? And in quite a few places the plastic is cracked, so does anyone know how to weld plastic? If I do end up deciding to paint my ATV I might just use black plastic zip ties to hold the plastic together and to blend with the black.

Thanks,
Storm

So I have a 12v accessory plug (Cig lighter style) to install on the 300.
I can either wire it into the plug that’s on the handlebar or wire directly into the harness somewhere.

Question is, where would you mount the plug?
I was thinking of drilling a 30mm hole somewhere on the front plastics up near the steering head and flush mounting it.

If you have installed a plug, let me know what you did 🙂

So I have a 12v accessory plug (Cig lighter style) to install on the 300.
I can either wire it into the plug that’s on the handlebar or wire directly into the harness somewhere.

Question is, where would you mount the plug?
I was thinking of drilling a 30mm hole somewhere on the front plastics up near the steering head and flush mounting it.

If you have installed a plug, let me know what you did 🙂

So I have a 12v accessory plug (Cig lighter style) to install on the 300.
I can either wire it into the plug that’s on the handlebar or wire directly into the harness somewhere.

Question is, where would you mount the plug?
I was thinking of drilling a 30mm hole somewhere on the front plastics up near the steering head and flush mounting it.

If you have installed a plug, let me know what you did 🙂

hey guys so one of my ROCK nerf bar nets is ripped. Im looking all over for replacements but I think I want to go with red ones and the only ones I’ve found that were ROCK brand were black.

Does anyone or has anyone ever tried to put TUSK or ALBA nets on another set of nerf bars? How interchangeable are the nets?

Trevor
07 TRX 400ex

I have been thinking about a 2-up seating arrangement for safer and more comfortable riding with my 5 year old daughter. At some point I will probably in something nicer, but tHis does the trick for now.

As you can see it is just an old mower seat. I attached it to the rear rack with 3/4" conduit clamps and self tapping screws. A total investment of $1.07.

And the best part, she loves it!

Next best thing? I can still access the storage box!

I need to have some welding done on the rack, and when i do i will Look At a front latch of some sort and a seat belt.

Rob

Santa made his rounds and I was lucky enough to get a new 12" Dual light bar for my Rubicon.

12" Dual Row Light Bar – DRC12 – 72W

It’s from a Canadian company named Speed Demon and available at my local Honda dealer as well as the local Yamaha and Harley/Arctic Cat dealers.

Speed Demon’s DRC series has been our premier model and is the result of over 4 years of experience in the LED lighting business. It features high-performance CREE LEDs, patented reflectors, and an industry-leading lifetime warranty. Like all Speed Demon Lights, these lights are waterproof, dustproof and vibration resistant so you’ll never have to worry about the extreme conditions you put them through.

12" DRC LED Light Bar Combo Beam
LED Power: 72W and 5760 lumens
Beam Pattern: 90*/8*
Operating Voltage: 10-30V DC
Waterproof Rating: IP 67
Polycarbonate Lens (PC)
Heavy duty extruded aluminum housing, heat sinks, and brackets
50000 hours LED life
Size: 13.36" x 3.08" x 3.41"
Lifetime Warranty

I could have ordered a Rigid bar online, but like to support my local dealer and was very happy with the build quality and light output. A few of the guys at the dealership had them on their trucks and quads and I liked. I believe they are Chinese made, but at $249, they feel and look much better then my neighbour’s Chinese Rigid knock-off. I purchased the wiring harness so no cutting/splicing besides a small hole for the flush mounted switch. Very happy and hope to get it installed this week.

My son got a new set of PowerMadd Sentinel hand guards for his 420 so a good Christmas all around.

Merry Christmas and Happy Holidays to all.

Jeff

Attached Thumbnails

 

Do they make aftermarket floor boards for this model? I see them on most but I couldn’t find anything online.

Thinking about getting one of these radios. Does anyone have one? Is the extra $70 worth it for Bluetooth?

BOSS AUDIO ATV20 Powersports Plug and Play Audio System with Weather Proof 6.5 Inch Component Speakers, Built in 450 Watt Amplifier. https://www.amazon.com/dp/B004S50WZG…_zFBFwbDYAK2V8

Attached Thumbnails