I noticed while riding yesterday that when taking off in high it will lurch like something is possibly slipping. It will do it 2-3 times until it picks up some speed. Low and reverse do not do this. Belt seems to be fine based on sound, no squealing. Within the last 50 miles I have changed the rear fluids with OEM Polaris fluids. I thought maybe it was low, but if anything I had slightly too much and let the excess flow out.
I noticed while riding yesterday that when taking off in high it will lurch like something is possibly slipping. It will do it 2-3 times until it picks up some speed. Low and reverse do not do this. Belt seems to be fine based on sound, no squealing. Within the last 50 miles I have changed the rear fluids with OEM Polaris fluids. I thought maybe it was low, but if anything I had slightly too much and let the excess flow out.
I recently added SATV springs to my 570 and the increase in height from springs alone is enough for me to remove the lift. Question is, I bought the RZR with the lift already on it and do not have the stock bolts. Can I use the ones that are on the lift are will be they be too long due to the extra highlifter bracket thickness?
I recently added SATV springs to my 570 and the increase in height from springs alone is enough for me to remove the lift. Question is, I bought the RZR with the lift already on it and do not have the stock bolts. Can I use the ones that are on the lift are will be they be too long due to the extra highlifter bracket thickness?
The wife just got a very low mileage 2013 Rzr 570 and we’re looking for a good rear storage box, that does NOT obstruct the rear view. Also must be dust proof and water resistant. What do you guys have that you think she would like and fits her requirements? Also would like the bad on anything you’ve owned that was junk. Thanks in advance.
I asked this question on the general discussion, but have gotten no replies. I know some of you on this discussion are running these tires. I’m looking to buy the MT-962 27/8.5/14, for all four. Les Schwab is the only place that I can find them locally and they want $567.80 for the set. Can I do better online? Where have some of you gotten yours?
My 12-570 stalls when u break hard and come to a stop. It also does it when you first start driving it when u stop. Machine has just under 8000 miles on it.
Any ideas?
Hey guys, first time poster. I bought a ’15 570 about a month ago. Currently has 24 hrs and about 360 miles on it. Last night, me and some buddies rode in the rain. 3 of us have 570’s. Multiple times, my Rzr’s check engine light came on briefly and the engine sputtered/backfired. When i let off the gas, it was fine and the light shut off. From a little research, i think this may be an issue with the throttle position sensor? Also, my Rzr is set up almost identical to my buddies and seems to have slightly less power then theirs. Would the throttle sensor affect this? It seems that it doesn’t rev as high as it should. Thanks for the input.
Need help, I just put a new SLP clutch kit on my 2015 RZR 570, I’m running 27" ITP’s, set up the new rooster weights as suggested, 1 red bolt with 1 thin and 1 thick washer lock tighted in, new helix and spring. Put everything back together and went for test ride it accelerated awesome but when I let off the accelerator and just before it comes to a stop there is a squealing noise that I am assuming is my belt. Any ideas?
