Category Archives: Honda FourTrax

Will this fit??

Are the steering stems the same diameter on the 200 and 300?

I need a steering stem bushing for my 94 300 and found one from a same year 200. Do you think know it will fit?

Sent from my SM-N920V using Tapatalk

Will this fit??

Are the steering stems the same diameter on the 200 and 300?

I need a steering stem bushing for my 94 300 and found one from a same year 200. Do you think know it will fit?

Sent from my SM-N920V using Tapatalk

1986 350 fourtrax

finally was able to get around to looking at the bike. I was afraid that it got hot and had a major issue, I am a little more hopeful today. when I turn on the key I cannot hear the fuel pump running, so I am hopping it is either a fuse or a bad fuel pump. any good suggestions on where I can pick up a new fuel pump?

2008 foreman shake on down shift

I am test driving a 2008 TRX500FPM8 that a friend owns. Only 99 hours and under 400 miles. When I down shift by pushing down on the foot pedal the atv shakes a bit. I am new to manual atvs and may not be doing it smoothly as I let off the gas but wondered if a shake or shudder is normal. He is asking $3500 and a it has a winch.

2008 foreman shake on down shift

I am test driving a 2008 TRX500FPM8 that a friend owns. Only 99 hours and under 400 miles. When I down shift by pushing down on the foot pedal the atv shakes a bit. I am new to manual atvs and may not be doing it smoothly as I let off the gas but wondered if a shake or shudder is normal. He is asking $3500 and a it has a winch.

Winch question

I am looking at getting either a foreman or a rubicon in a 2015 model. I want to put a winch on it but read some reviews that they had to put the winch on upside down to make it work. Is this installer error? I am looking at getting the superwinch 3500lb. Will that work? I am an Amazon guy so I’ll be purchasing from them. Also, which winch plate do I need to get for the rubicon? What model number? Dealership is trying to tell me it is $200 for the plate.

I put a superwinch 3500lb on my Rancher with no issues so just checking. I already have the trailer and will use Christmas money to get the winch and plate. I just need to find money to buy the 4 wheeler. Lol

86 fourtrax 350 4×4 blows fan fuses

I have a 1986 fourtrax 350 4×4 that blows fan fuses I believe probably when it tries to kick on the fan. I have replaced the fuses and also the oil temp sensor to no avail. Does anyone know what could be causing it to blow this fuse? Any help is greatly appreciated.

leaking gas tank at weld?

I was reading that this is a normal problem. I just bought another 300fw. the tank is leaking at the weld on the right side near the front of the tank. Should i have it welded or use sealall? or somthing like that? Also I noticed there is a little rubber peice on the other side of the tank that goes between the weld. There is none where this leak is. I need to find one for the leak side. Anyone have one they could sell? It would fit in a envelope with a stamp.

Thanks

1998 trx300fw cdi

My CDI went bad, found the side was blown out. Put new one on, and all the voltages read good. 3 weeks later, it blows again. Found the in line fuse off the positive battery, was melted. Replaced the fuse holder and the fuse blew as soon as I hit the starter. smoke from the area of the CDI, Put a new fuse and tried it, and everything works good, except there is no spark. I am thinking either I have a direct ground on the wiring harness, but more likely a stator that intermittently goes to ground. What is your experience on this issue?

Thanks!