I have lost rear wheel yesterday , i ran slower and crash… Is what it is repaired by welding or other? Or should I change the axle? see pictures join .
First gear is gone on my Foreman. ’07 model with 1200 hours. Engine ran fine other than first gear.
Everything has to come apart to remedy the situation. I have the shop manual, plenty of tools and experience with engines and sequential gearboxes on racecars. No experience on bike engines.
I have the engine out, the cylinder and piston off and the front case cover off.
So far the piston rings are out of limit.
My questions are:
1) What "gotchas" should I look out for.
2) I haven’t spec’d the piston. If the piston is good should I just replace the rings? Should I hone the cylinder?
Any suggestions/recommendations would be appreciated.
hello everybody iam sander living in sweden and driving a Honda Foreman 450es
i hope you can help me with a problem!!I use the AtV mostly in de summer.. so yesterday i took it out for a drive.. and suddently my display is not working its blank.. i have had this problem many time specially when it had standing still a couple of mounths…
Tomorrow I’m going to go buy an old 85 big red 250 in hopes of putting its rear end on my 300. Now I know I will have to either weld a bracket or my 300 swing arm to the axle tube, i know what I have to do to make it fit. I just need to know if this will work, as I have seen a thread on this in the past, but there was never a definite yes that it works, due to something unique about the diff I’m not sure what it said. But will this swap work? Thanks in advance for the help
Tomorrow I’m going to go buy an old 85 big red 250 in hopes of putting its rear end on my 300. Now I know I will have to either weld a bracket or my 300 swing arm to the axle tube, i know what I have to do to make it fit. I just need to know if this will work, as I have seen a thread on this in the past, but there was never a definite yes that it works, due to something unique about the diff I’m not sure what it said. But will this swap work? Thanks in advance for the help
ad the idea in my head for sometime to build a 4×4 quad with a 450 sport atv motor on it for the power and the option of a manual clutch I tossed around the idea of using a chain drivin 4×4 scrambler but I really want to use a fourtrax 300, any one have any ideas of how I could pull this off? Any options or ideas are taken into thought
My son has a 03 trx 90 I went to change the oil and on the bottom of the engine noticed 2 drain plugs I can’t find for the life of me what the second drain plug is for can anyone please enlighten me? Is it transmission ? What fluid does it take?
I have a 96 TRX 300 4×4 with a rusted out frame. I recently found a 91 300 4×4 frame and was planning on moving my 96 drivetrain to the 91 frame. I was wondering what differences I should look out for.
I have a 96 TRX 300 4×4 with a rusted out frame. I recently found a 91 300 4×4 frame and was planning on moving my 96 drivetrain to the 91 frame. I was wondering what differences I should look out for.
Getting ready to buy a 2015 rubicon. I’m definitely getting power steering but can’t decide on the foot shift or auto. Will mostly be used around the house getting wood and plowing snow. I’m afraid of the transmission on the auto I would like to get your opinons on the hondamatic I have a 2005 foreman ES that I bought new it’s has had a hard live but has never let me down