Anyone try a spark plug from magnum tuning, I believe the brand is brisk. They have some pretty impressive claims. 3% more horsepower and better mpg.

When setting the exhaust valves, it calls for .15-.20 mm. But what I don’t understand is the fact that the decompression pin should be holding that one exhaust valve open a bit. Does this not effect the clearance adjustment? (600 Grizzly).

So I am looking at buying new tires and am thinking Kenda bear law htr’s in 27"x12 tire size.

My 2013 Grizzly 700 EPS is totally stock otherwise and I’m wondering if I wait to put a clutch kit in until spring or summer if riding that way could do any damage to the motor or transmission?

We ride two-up usually and I’m looking for more ground clearance with the taller tires.

Which clutch kits I should be looking at when the time comes?

It a typical cold Canadian winter and I have no garage to work in.

Thanks for your input.

Sent from my Grizzly 700 somewhere in the Canadian wilderness.

Hello all. This is my first post. I bought this 2005 grizzly 660. Just put a plow on it. Rear tires only spin. The red 4wd selector on the handle bar is pushed in and only rear ties spin. When selector is out same thing. When I move over the diff lock selector and try to engage that it runs really bad. ie misfiring. Maybe elec issue? I put the bike on jackstands to verify that rear tires are only spinning. Any diagnostic help would be appreciated.

Hey guys I just have a quick question about flushing the radiator I have already drained the fluid out of the water pump put in new fluid and have read other articles sayin that there are air bleeder screws that get the air out but upon examination on my radiator and other threads about a radiator flush the bleeder screws are not on my water pump like they are on other models is this true? And if so is there are a good way to "burp" the air out?

Hi. I have a 2000 yamaha kodiak 400 4×4 . When I try to start it turns on the temperature light like if its over heated. If the temperature light is on than the fourwheeler wont start. Does any one know how to fix it or whats the problem.

Sent from my SGH-T399 using Tapatalk

Should not have let buddy go for a ride on the grizzly….

Not sure what exactly happened, other than bottoming it out pretty hard on a large rock….but now when I shift to neutral it’s still stays in gear and N light won’t come on and the shit lever will not go up to Low gear now

Any suggestions as to what the problem is or what is potentially bent or broken would be greatly appreciated

Does anyone on here know if a stock exhaust off a 2015 grizzly 700 will fit on a 2010 grizzly 700? i know the header piece is different but the actual muffler piece itself looks the same, just wants to make sure it fits before i buy it. Thanks in advance!

Hi. I have a 2000 yamaha kodiak 400 4×4. When I try to turn it on with electric start it wont make any motor sound. Does anyone know the problem.

Sent from my SGH-T399 using Tapatalk

Hello,

I have a 660 grizzly, a cvt.

Had the problem it wouldnt start in neutral, but solved it with a new sensor.

I do have a problem with the 4×4. When it’s engaged, the rear wheels don’t work.
The dash shows the 4×4 sign, i hear clicking from the relays and i hear some servo sounds from the front div.

If I noticed right, I do see some rotation from the connecting axl, can there be a problem in the rear div?