I have a 2012 grizzly 550 FI i swamped it last weekend and the next day i drained everything properly and got it running again drove it a round for 10 minutes shut it off and thats the last time she started for me the starter is free spinning everytime i try and start it then the starter quit then the solenoid started to click so i thought no big deal i will buy a new solendoid and a new starter let it set for a week the new solenoid and starter came in today i installed it now im back to square one with the starter freespimning now code 12 is comming up on my screen wich that is the crankshaft position sensor i stripped all black tape off it and checked to make sure theor were no kinks in wires or shorts but the wires are just fine need help really bad im stumped thank you.

I have developed a Whirrrr or buzzzzz or bizzzzzzz kind of noise in my starter. I have about 3000 miles on my machine.

It happens mainly just after the starter button is released. the starting action of the starter seems fine and the bike runs normal.

occasionally its makes this buzzing whirring noise as it is starting.

Any ideas what I could be facing?

Thanks a million

2009 Grizzly 700 EPS. (black.. the fastest color. haha)

I’ve been riding the grizz all year with no problems. Went to start it this morning started ran for 15sec and stalled went to restart and lost all power no display light no head lights nothing. Thought the battery was bad put a charger on it still nothing. Checked the fuses all seem good cleaned the battery terminals and the ground on the engine and still nothing.am I missing a fuse somewhere bad ignition switch??????

well, it was my sister’s bday recently… picked her up a pair of KAWELL led cubes….

and while i was at it, i bought a single row version thinking it would work good for a low profile light for my dad’s beartracker…

STAY AWAY FROM THIS BRAND.

they claim the same wattage and similar lumens to some of the proven names… totron… rigid etc… they arent. they arent even as bright as the stock grizzly lights. with just the kawell on, my stock grizzly lights create a shadow in front of her quad with them on.

im hoping to get some sort of a refund.

i feel bad for people who buy these lights thinking that is what led lights have to offer. if they would have spent 2x as much they would have gotten a 10x brighter light.

ive seen others talk highly of their amazon leds. im guessing i just got a particular cheap knock off.

well, it was my sister’s bday recently… picked her up a pair of KAWELL led cubes….

and while i was at it, i bought a single row version thinking it would work good for a low profile light for my dad’s beartracker…

STAY AWAY FROM THIS BRAND.

they claim the same wattage and similar lumens to some of the proven names… totron… rigid etc… they arent. they arent even as bright as the stock grizzly lights. with just the kawell on, my stock grizzly lights create a shadow in front of her quad with them on.

im hoping to get some sort of a refund.

i feel bad for people who buy these lights thinking that is what led lights have to offer. if they would have spent 2x as much they would have gotten a 10x brighter light.

ive seen others talk highly of their amazon leds. im guessing i just got a particular cheap knock off.

98 kodiak 400 no spark. Anyone have a pic of the pigtail wire ends that go into the cdi box. Worling on one and soneone has pulled the wires out of the plug ends. And i dont know if there right. Stator is new but dont know if its actually good. It doesnt test good on ohms check. Anyone know the actual voltage output for the pickup and exciter coils as well.

OK, officially need help. Want to wire aux fan switch for my 2011 Grizzly 700 FI. Want to have ability to switch fan on when slow or waiting in line, but have temp sensor still function normally.

Did this on my 2007 YFZ450 and it was easy, splice two temp sensor wires to a switch, however the Grizzly temp sensor apparently is on the engine, and only activates the idiot light.

Need instruction, and location/color of said wires on bike to tap. Please only post if you have done this and it works, as I cant be down a work machine while I repair fire damage…

Im not an idiot, can solder, splice, etc., just confused on how this system operates, and wire diagram is about to have me open that new bottle of Jack..

Cheers mates !

which would you go with? I am going to purchase either a 12" double row light bar or a set of 3" cubes. the light bar would be a combo, beam and flood light pattern.

what are the pros and cons of each?

I am soon purchasing some LED lighting for my Grizzly. I was dead set on getting a Light Bar, but now I am wondering if I should consider getting 2 (or more) cubes instead.

So that is the question. What is your preference? I would really like answers from people who have (or had) both.

Hi,, I bought a used Grizzly and in the process of restoring, see 2 wires coming off a wiring harness that are black and pink. its a short pigtail with male and female bullet type connectors and is located at the right front shock. does anybody have a clue to what these may have been connected to??? I have seen a wiring diagram but could not locate a pink wire.