I am selling my 60whp Raptor 700 as we are moving to the country and have a long lane to snow olow. Instead of getting a plow truck I decided I want a rzr to throw a plow on and them it can be my toy the rest of the year.
I have looked at a bunch of vehicles and am pretty sure I want a rzr. I was set on buying a used 2011 to 2013 rzr xp900 but seeing as how they are 10k to 11k it does not make sense to buy used when abernathys has the white lightning 900s for 12,300 or the white trail for 11,300. By the way, does anyone have experience with abernathys? They are about 550 miles away but I’m fairly certain that nobody in northern Illinois can touch their prices.
Anyway…my dilemma is: 900s or 900 trail?
The only difference are the suspension and width right? How is the ride between the two in bumpy terrain? How about the stability? 10 inches vs 13 inches is a fairly significant difference in travel, as is 10 inches of width. My Raptor is 51 inches and I have no problem riding the tighter tails at my buddy’s place in wisconsin. I am planning to go to Hatfield McCoy soon and we also ride little sahara sand dunes once a year out in utah. I’m leaning toward the s but am open to opinions!
I am selling my 60whp Raptor 700 as we are moving to the country and have a long lane to snow olow. Instead of getting a plow truck I decided I want a rzr to throw a plow on and them it can be my toy the rest of the year.
I have looked at a bunch of vehicles and am pretty sure I want a rzr. I was set on buying a used 2011 to 2013 rzr xp900 but seeing as how they are 10k to 11k it does not make sense to buy used when abernathys has the white lightning 900s for 12,300 or the white trail for 11,300. By the way, does anyone have experience with abernathys? They are about 550 miles away but I’m fairly certain that nobody in northern Illinois can touch their prices.
Anyway…my dilemma is: 900s or 900 trail?
The only difference are the suspension and width right? How is the ride between the two in bumpy terrain? How about the stability? 10 inches vs 13 inches is a fairly significant difference in travel, as is 10 inches of width. My Raptor is 51 inches and I have no problem riding the tighter tails at my buddy’s place in wisconsin. I am planning to go to Hatfield McCoy soon and we also ride little sahara sand dunes once a year out in utah. I’m leaning toward the s but am open to opinions!
After a couple of rides I’ve noticed a small amount of what looks to be a fine condensation in the vent tube, just outside the weep hole. Not even enough to make a drop. Is this normal? The anti freeze is green and this moisture is clear. I just replaced pump seal so I’m a little paranoid.
just wondering how hard it is to install the boondocker timing chain tensioner? with out taking valve cover off how can i tell if most or all valves are close so the timing chain doesn’t jump. my stock tensioner is rattling more and more thinking about changing it. thanks
Just got these hooked up with the kicker px50.2 Bluetooth amp awesome sounds and its good and clear. Was kinda a pain to run the wire for the speakers and the wires for the leds but in the long run well worth it
Just got these hooked up with the kicker px50.2 Bluetooth amp awesome sounds and its good and clear. Was kinda a pain to run the wire for the speakers and the wires for the leds but in the long run well worth it
Just wondering how much travel do various suspension seats have?? All the stock have is foam and that gets flat after sitting awile. Thanks. :ride::rollfinger:
Just wondering how much travel do various suspension seats have?? All the stock have is foam and that gets flat after sitting awile. Thanks. :ride::rollfinger:
Hey guys, I have a 2015 900s that I just bought super atv replacement ball joints for. No, the factories have not worn out already, this is due to a screw up on my part while reinstalling factory ball joints into A-arms after having them powdercoated!! My question is, the pinch bolt on the super Atv’s is about a 1/4" shorter than OEM, causing the pinch bolt to not come totally through the full length of the hole in the spindle. It is about an 1/8" short. The snap ring groove and the groove in the pinch bolt all line up perfectly though. Can anyone tell me from their experience with these or offer any opinions on if yall feel like these are safe to install. I’ve included to pics. Thanks ahead of time for any Info!Attachment 136368
Has anybody gotten the kicker km65s in the tower enclosures. I got them and havent figured out how to run the wiring for them. I dont really wanna drill holes in the enclosures or is there a much simpler way that i am missing?
