OK here is what I am asking. Not sure if it should be on a poll or just this thread. I am not a fan of the plastic fuel tank on my xp1000. I have contacted and talked with Boyd LLC fabrication who manufactures aftermarket and custom fuel tanks. I had rather lengthy conversation on the possibility of making a aluminum tank for the xp1000. Now I am not sure what tank the 4 seat has in it. Are they the same? If not they could also do one for that car. So here is my question. Would anybody be interested in a possible purchase of a tank like this? It could made with a upside down valve to the fuel fill also. Price will be determined after They get the mockup done. For now lets put price aside and just give input if you think you would consider changing tanks. I would need to locate a salvage xp1000 fuel tank and ship it to them along with a cardboard layout for the tank. The prices on their website seem very reasonable and that’s why I called them. So any input?

Hello everyone, purchased a new RZR 570 back in late October. Only put 50 miles on so far, but definitely know I want to upgrade the tires for sure and possibly rims also. I ride a lot of hard pack, sometimes rocky, trails in WI and the UP, but also the occasional mud hole or swampy area with my buddies. What does everyone suggest for a good tire/rim combo. I like both the ITP or STI wheels and it looks like a common offset is 4/3 which would be ok for a little more stability. I want a 26" tire, but no taller due to possible rubbing issues and no plan to do a lift. Thanks.

Ok guys I have pretty much narrowed it down to these two tires. Why? Because I want a DOT Radial that holds up good on pavement and that pulls good on the trail. I ride back roads of pavement and gravel as well as some rocks and some mud. I also picked these because they come in 9" and 11" wide which matches the tires on my rig. 28" tall, wish I could fit 30’s but can’t without a lift. I’m at about a 1700+ lb rig so I want an 8 ply heavy tire.

I hope this is not a bad word on the RZR forum but I have Honda Pioneer 1000. I have found a lot of good information on this forum so that’s why I am asking here. Please be nice. lol

Can you guys give me input on which tire would be best for my needs… considering road use, long wear, and grip on the trail?

Advice please.

Ok guys I have pretty much narrowed it down to these two tires. Why? Because I want a DOT Radial that holds up good on pavement and that pulls good on the trail. I ride back roads of pavement and gravel as well as some rocks and some mud. I also picked these because they come in 9" and 11" wide which matches the tires on my rig. 28" tall, wish I could fit 30’s but can’t without a lift. I’m at about a 1700+ lb rig so I want an 8 ply heavy tire.

I hope this is not a bad word on the RZR forum but I have Honda Pioneer 1000. I have found a lot of good information on this forum so that’s why I am asking here. Please be nice. lol

Can you guys give me input on which tire would be best for my needs… considering road use, long wear, and grip on the trail?

Advice please.

Axiom side by side is selling our 2015 XP1000 RZR. This is a new machine that has 11 miles on it. This was only used to make parts that we sell and to take to trade shows to display our parts. This is in new showroom condition. It has never been on trails or dirt. We are selling this with all new Axiom side by side parts that we make for this machine. Over $1800.00 worth of New Axiom parts installed. Outlaw Roof, Lower Doors, Skid Plate, A-Arm Guards, Trailing Arm Guards, Grant steering wheel, Exhaust Cover, Front and Rear Bumpers. Does not have extended warranty. Located in Cincinnati Ohio. Cash only, No Trades. Contact Rick Vogt @ 513-317-3790 if interested. $17995.00

Attached Thumbnails

 

 

 

 

 

Axiom side by side is selling our 2015 XP1000 RZR. This is a new machine that has 11 miles on it. This was only used to make parts that we sell and to take to trade shows to display our parts. This is in new showroom condition. It has never been on trails or dirt. We are selling this with all new Axiom side by side parts that we make for this machine. Over $1800.00 worth of New Axiom parts installed. Outlaw Roof, Lower Doors, Skid Plate, A-Arm Guards, Trailing Arm Guards, Grant steering wheel, Exhaust Cover, Front and Rear Bumpers. Does not have extended warranty. Located in Cincinnati Ohio. Cash only, No Trades. Contact Rick Vogt @ 513-317-3790 if interested. $17995.00

Attached Thumbnails

 

 

 

 

 

We are excited about a new door we have coming out. These are once piece formed aluminum doors with a close-able air vents with billet grills. They are very strong and light. These doors are made in the USA. We have them listed on our site for pre-order. We should have them available for shipping in about a week. Price is $399 with free shipping. Here is a link to the product. I know we need better pictures!

Tusk Force UTV Doors

Here is a pic from the shop.

We are excited about a new door we have coming out. These are once piece formed aluminum doors with a close-able air vents with billet grills. They are very strong and light. These doors are made in the USA. We have them listed on our site for pre-order. We should have them available for shipping in about a week. Price is $399 with free shipping. Here is a link to the product. I know we need better pictures!

Tusk Force UTV Doors

Here is a pic from the shop.

Does anyone have an extra (high flow) 2015 XP 1000 outer clutch cover laying around or have one to sell? I am in need of one. Give me a PM if you are interested in getting rid of one.

Thanks

I’ve done extensive reading on this subject and I think I’ve narrowed my decision down to buying a bar from either of these two. I’ve had a hard time deciding between a 20" and 30" but I think I’ve settled on a 20" mounted at the top of my windshield. Just hope I can make it work with my lock and ride roof.

So I’m struggling picking between the two company’s. I’ve heard great things about Matt and the Totron lights for 149.99 (20"). But seems I’ve heard people say the Sirius Pro are brighter and I like that they’re are made here in the USA.

Anyone had a chance to compare the two? I’m leaning towards Sirius Pro, but before I purchased I thought I’d ask.
Thanks