I have a 1998 Polaris 425 magnum 4×4 and the brake system had to be redone. My issue is the rear brake line has been discontinued. My question is what is the thread diameter and size that goes into the caliper and also the 4 way split box? I need to try to find a brake line that is universal or meant for another quad that will fit mine. Any help would be appreciated.
No brakes with lever but when pedal is stepped on lever firms up and fluid squirts out rear resevoir. Replaced rear master, no change. Thinking maybe rear caliper? Help
Anyone go through this yet my factory lower control arm folded in half? Is it worth going with the highlifter LCA’s over factory looking for something little stronger than stock.
I bought a 2001 sportsman 400 "project" atv. When I got it there was no rear brake pedal at all!! I recently found the right one for it. I put it on correctly I think lol and there doesn’t seem to be much spring tension at all, is the spring supposed to be wound a few times before hooking it up? (Seems impossible). All the rest of the rear brake is there and doesn’t work of course,that’s the next (expensive) project! I should have just sat back and enjoyed retirement! Thanks
I think i need to re build my front master cylinder. Im a bit suprised at the cost of the kit, over $100. All i really need are the seals. Anyone know if they are available by themselves?
I have a 2007 sportsman 500 efi and the front and rear shocks are shot. I want a performance replacement without dropping 500 dollars. The front shocks are the old strut style and I have n0t been able to find a aftermarket option.
Thank You
I was going to install some SLC arched rear a arms today and when I took off my right rear shock I noticed there was some oil on the shaft. The shocks only have around 200 miles on them as they were only purchased 6 months ago…pretty disappointed to say the least.
I’m going to send them an email and see what they say, in my eyes it seems they should take care of this on their dime including shipping…but we’ll see. I’ve been extremely happy with these so far as the ride is amazing with the stage 4s so hopefully we can get something worked out.
I hope i can get some help on the following points.
1 – I recently bleed my brakes and now the lever is two hard, just a little touch and is already braking, is this normal?
2 – I also have a problem in the foot brake, it get´s no pressure and does not brake, what can cause this?
3 – Is it normal that the hand brake brakes more in the front that in that back wheels?
Sorry for my english, but i´m from Portugal.
Thank you all for the help.
