Recently bought it used but it didn’t come with an owners manual does anyone know what type of oil it uses synthetic or regular?

So I bought this cargo box from our local atv place and there are no instructions other than the paper that is included with the clip. There are no plugs/holes that shows where we can add the clip to that box and it appears we need to drill holes. It is not like the front cargo box that simply snaps in place. Anyone else have an history with this?

After days of searching I can’t find a specific answer to my problem. While not running I can shift smooth through all the gears. Even after I start it. I out it in first and take off and can’t get it to shift unless I slow way down then it will shift. But a little jerky. I have adjusted the clutch to 1/4 turn out from slightly seated. No change. If I hold up on the shift lever it stays in gear so I am assuming the shift plates are stuck together. It has sat up for a while. I changed the oil today( 10w40) and front and rear diff oil( all looked great) but at least it’s done. I read where I can add a little marvel mystery oil and that will help free them, so I’ve done that. So I guess now I just need to ride the mess out of it and see it it will free up? I tried holding the brakes and giving it throttle with no luck. Does this sound like just plates issue to you guys or something more?

OK so came across this the other day, had time to go look at it and the price was too low to say NO to
doesn’t run NO spark right now, needed the Honda , a snatch block and the winch to load it LOL

so now have one more toy to the collection

MAN it better snow this winter LOL

its an Arctic Cat 1996 ZRT 600,

Attached Thumbnails

 

We are having a sell on Boss Noss Nitrous kits starting Monday. If you havent looked into this kit you need to. Its the safest kit offered. Completely stand alone single solenoid wet kit. All you do is mount the nozzle, hook up power and ground and haul ass!!! Horsepower increases from 10hp to 60hp depending on the jets you want. These retail for $799.95. We will be selling them to forum members for $650…. you better get in on this while they last.
Call Griffin Performance to get yours 252-631-1044
Best part is that you dont have to change your tuning…. this will work on a stock bike or on a highly modified one without changing a thing.

2006 Grizzly

has been starting fine , till we made a trip and pulled off trailer .. then nothing ..

I have verified fully charged battery
Cleaned all contacts , terminals and ground connections
Checked starter on bench

I did find if i had tapped Relay , starter would function … Seems clear what could possibly be wrong ..

I had tapped relay a few times and the starter non stop (key off , kill switch engaged) until i pulled battery cable.

Ordered a new Relay , Installed and hit the starter button and nothing ..

Measured with volt meter and confirmed , not a click of relay at all . turn switch off and tried again and then the starter ran non-stop again till i pulled battery cable

So it would seem the relay was not the problem , the starter appears fine , terminals and ground are clean

Any suggestions on what would be next ?

Thanks

Brad

28" Zillas. Swamp river mud down here in south Ga. Looking for opinions please. Will they clear without rubbing and is there a better choice? Putting them on 12" ITP 316s. Thanks in advance folks, love the forum!!!

I have a new polaris RZR prerunner brush guard 2876403 that they sent me by mistake. Trying to sell it so I don’t have to eat the shipping and can pass the savings on to somebody else. I’m located in Memphis TN, could ship it for $150 or meet in person for $120 obo. Call/text me at 865-603-9631

Attached Thumbnails

 

Anybody got any ideas for mounting a fuel can system on the rear or anywhere else? I have the linq 6 and a can am bag on the back that I don’t want to have to move. Looking for some suggestions or ideas. I have looked at rotopax but don’t know how I would make them fit will the bad and rack extension.

Have a 2007 420 rancher, just had a big bore kit installed, and a starter is 2 months old. When I try to start the bike you can only hear the starter spinning, then it will sound like the teeth in the shaft catch the wheel and it will start then, any idea what is wrong.