Hey I have a atv trailer with lights just wondering has anyone tryed this or have it done I would like to do it to my bike it’s a 2014 sportsman 400. I have a 3 pin going to a 4 pin already made up was thinking hooking the 3 pin wires to my tail like wires witch have 3 wires too so I was wondering if I hooked them up it should work. Like to get a few answers before I hook it up just in cause I blow something. Thanks
Hey I have a atv trailer with lights just wondering has anyone tryed this or have it done I would like to do it to my bike it’s a 2014 sportsman 400. I have a 3 pin going to a 4 pin already made up was thinking hooking the 3 pin wires to my tail like wires witch have 3 wires too so I was wondering if I hooked them up it should work. Like to get a few answers before I hook it up just in cause I blow something. Thanks
Anyone know how to test a Throttle Position Sensor. I did an resistance test but I don’t know what the ranges should be. Does anyone have those specs?
Thanks in advance.
Anyone know where I can download a service manual?
Anyone know how to test a Throttle Position Sensor. I did an resistance test but I don’t know what the ranges should be. Does anyone have those specs?
Thanks in advance.
Anyone know where I can download a service manual?
Hello fellow 4 wheelers I have a 2005 TRX 400 FA which was not shifting. I replaced the angle sensor and now it works well when in drive but if at any time I put the thing in reverse it sets code 5 and misses badly. I am not able to get it to shift in any forward gear until I turn it off and restart it. What have I done wrong?
Anyone else had this code 5 in reverse or have any idea where I start to figure it out?
Testing did show that the throttle sensor to have some drop outs and at WOT it drops off to 310 ohms. Not sure that has anything to do with the missing in reverse though.
Hello fellow 4 wheelers I have a 2005 TRX 400 FA which was not shifting. I replaced the angle sensor and now it works well when in drive but if at any time I put the thing in reverse it sets code 5 and misses badly. I am not able to get it to shift in any forward gear until I turn it off and restart it. What have I done wrong?
Anyone else had this code 5 in reverse or have any idea where I start to figure it out?
Testing did show that the throttle sensor to have some drop outs and at WOT it drops off to 310 ohms. Not sure that has anything to do with the missing in reverse though.
I just replaced both master cylinders on a 2001 sportsman 400. Auxiliary brake (rear) bled real good, works like a charm! Question is….. After replacing the pull handle m/c,which caliper do I bleed first, rear caliper or the front two? Thanks
I pulled my plug the other day to see what it looked like and it was faint grey almost white. Installed it back checked my valves and ran at idle for nearly 5 minutes revving to half throttle a few times. Pulled the plug and it’s pretty black. I’m running a Lexx Mxe slip on, no air box lid with moose filter. Checked my carb and the main is a AB168, 42 pilot screw and 2-1/2 on the air/fuel screw stock needle position, 740 elevation . Question is what does the AB stand for? And does this sound like the right jetting 168 seems to be alot compared to the stock 148. I’m installing a HD cam chain and stage 1 hotcam and want the jetting right before starting
