Ok i bought this bike used and the shithead before me lost the pieces to keep the rear brake disk on the shaft coming out of the transmission and he just put some silicon sealant on there to keep it on…fast foward a few years and now the solicon has worn off and the disk is loose and rattles every time i use the brake at all….i bought the "right parts" on amazon the nyloc nut and washer BUT NEITHER OF THEM FIT i dont know how to fix this problem im in i hurry to get it fixed its embarrassing riding it and watching others stare at me as i try to brake. PLEASE HELP ME!!!!

Ok i bought this bike used and the shithead before me lost the pieces to keep the rear brake disk on the shaft coming out of the transmission and he just put some silicon sealant on there to keep it on…fast foward a few years and now the solicon has worn off and the disk is loose and rattles every time i use the brake at all….i bought the "right parts" on amazon the nyloc nut and washer BUT NEITHER OF THEM FIT i dont know how to fix this problem im in i hurry to get it fixed its embarrassing riding it and watching others stare at me as i try to brake. PLEASE HELP ME!!!!

Picked up a 96 Foreman 400 from a family member for $0. It was tuned up 3 years ago, parked in the garage, and sat ever since.

So when I got it I checked the tank and it was clean and dry. Decided to put some fresh gas in it, got it to start right up surprisingly, but would only run on choke and die when I got on the throttle.

So I bought a carb kit and put that in, cleaned all orifices. Carb kit I got had a new needle but not a new seat. The old seat looks pressed in but it looked clean from what I could see. There was some gunk in the main jet when I opened it.

Got it all back together and on the bike. Fired right up and ran like normal. Good sign. But after we shut it down, gas was pouring out of the overflow tube.

So I suppose the tank screen could have been bad but I never checked it cause tank looked clean, so I just ordered one now, and maybe more gunk got in between the needle and seat? Hoping that’s the problem. But if that doesn’t do it, is there a way to replace the seat, or has anyone else here had same problem on their Foreman 400?

My friends Gord, Richard and I decide to take the day off and go out for a rip on a beautiful September afternoon. We covered over 100 kilometres of beautiful northern Ontario trail, enjoyed some early fall colours and found some decent mud holes!

Polaris Sportsman
Yamaha Grizzly

Bike-To-Bike Intercom: Scala Rider G9x
Filmed on GoPro Hero 4 Black

Check out my YouTube channel for more ride vids: https://www.youtube.com/channel/UCi8…obSQLe6sDd1Qhw

Just wondering, is there any ACTUAL advantages of running premium gasoline in an ATV?

New to can am just sold my 14 Polaris What should I look for and do to the new bike I’m excited to own my first can am own several other quads but this is by far the baddest

I just recently got a 91 trx250x…was told it blows out black smoke…I was told it could possibly need new piston rings and gaskets…I’m look for s manual to help me break it down and rebuild it

What’s a good mcl plug to use with a 16 570? Part number please